628192

Grizzly BRM 51-190 BSA Manual

86
Zoom out
Zoom in
Previous page
1/152
Next page
86
UK
Setting the Cutting Height
The equipment has 10 positions for set-
ting the cutting heigh (25-80 mm):
1. Pull the lever (18) outwards and
push it to the desired position .
2. Push the lever back in.
The correct cutting height is around
30 – 45 mm for an ornamental lawn and
around 40 – 65 mm for a utility lawn.
Select a greater cutting height for
the rst cut of the season.
Operation
Observe the noise protection and
local regulations.
Starting and Stopping the
Engine
Warning! Petrol is ammable.
Start the engine at least 3 m
away from the lling location.
Start the equipment on a sturdy,
level base, if possible not in long
grass. Ensure that the cutting tool
is touching neither objects nor the
ground.
Regularly check petrol and oil level
(see „Initial Operation“) and rell in
due time.
Starting the Engine:
1. Set petrol lever (23) to position
.
2. Pull the safety catch (3) towards
the handle bar (1) and hold it.
3. Pull the starter cord (22), the
engine starts.
Stopping the Engine:
4. Release the safety catch (3),
the engine stops and the blade
is slowed
Mowing
1. Start the engine (see ).
2. Wheel drive:
On: Pull the drive catch (2)
towards the handle bar. The
mower moves forwards.
Off: Release the drive catch (2)
The equipment stops.
Set petrol lever (23) to position
for short breaks and to re-
duce noise.
The change in motor revolutions
via both positions +
does not inuence the speed of
the power wheels. They cannot be
regulated.
Working Instructions
• As far as possible, mow the lawn when
it is dry in order to protect the turf.
• Set the cutting height such that the
equipment is not overloaded.
• Run the equipment at walking speed
in lines that are as straight as pos-
sible. For uninterrupted mowing, the
lines should always overlap by a few
centimetres.
• Do not move backwards.
• On slopes, always work across the
slope.
• If the blade comes into contact with
a foreign body, switch off the engine
immediately. Wait until the blade is
stationary and check the equipment
for damage. Restart work only if the
equipment is undamaged.
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly BRM 51-190 BSA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly BRM 51-190 BSA in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info