Manual Grizzly BRM 51-190 BSA (page 87 of 152) (English, German, Dutch, French, Polish)

628192

Zoom out

Zoom in

1/152

• Switch off the equipment during long-

er breaks and for transportation and

wait until the blade is stationary.

• Clean the equipment after each use,

as described in the “cleaning and

maintenance“ chapter.

Cleaning and Maintenance

Have any repair and mainte-

nance work not described in

these instructions carried out

by a specialist workshop. Use

only original Grizzly replacement

parts. Risk of accidents!

Carry out maintenance and clean-

ing work strictly with the engine

switched off and spark plug con-

nectors removed. Risk of injury!

Allow the equipment to cool

before any maintenance and

cleaning work. Elements of the

engine are hot. Risk of burning!

Wear gloves when handling the

blade.

For cleaning and maintenance

work, also observe the Briggs &

Stratton instruction manual sup-

plied.

We recommend contacting an au-

thorised Briggs & Stratton dealer for

maintenance work on the engine.

Cleaning and General Mainte-

nance Work

Do not tilt the equipment sideways

or forwards. Operating uids could

leak out and the engine could be

damaged.

• Always keep the equipment clean. To

clean, use a toothbrush or cloth but no

corrosive cleaning agents or solvents.

Do not use water to clean the engine as

it could contaminate the fuel system.

• After mowing, remove plant remains

that are stuck to the equipment by us-

ing a piece of wood or plastic. Clean

the vent holes, ejection hole and

blade area especially. Do not use hard

or pointed objects, which could dam-

age the equipment.

• Oil the wheels from time to time.

• Before each use, check the lawnmow-

er for obvious defects such as loose,

worn or damaged parts. Check that

all nuts bolts and screws are sitting

rmly.

• Check covers and guards for damage

and that they are sitting correctly. Re-

place if necessary.

Replacing the Air Filter

Do not operate the equipment

without the air lter otherwise dust

and dirt will get into the engine and

result in damage to the machine

1. Release the screw at the air

lter cover (14) and ip open the

cover

2. Remove air lter (13).

3. Replace a defective air lter

with a new lter (see “Spare

Parts”).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly BRM 51-190 BSA in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,21 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Grizzly BRM 51-190 BSA Manual

Product: