626716
95
Zoom out
Zoom in
Previous page
1/136
Next page
94
GB
Putting the telescopic arm to-
gether:
1. Put both parts of the telescopic
arm (18) together and tighten the
screw.
Make sure that the cable is not
clamped.
Assembling/dismantling the
telescopic arm:
2. Push the device along the guide
rail (
11) into the equipment
holder (24) of the telescopic arm.
It locks into place audibly.
3. To dismantle, pull the device out
of the holder (24) with moderate
force.
Adjust the height of the tel-
escopic arm
Adjust the length of the telescopic
arm for your size with the help of
the adjusting screw (19).
Adjusting the working angle
For a comfortable edge cut, the equipment
holder (24) of the telescopic arm can be
rotated to the right or left.
Set the desired position by pulling
the release switch (22) and rotating
the equipment holder (24) of the tel-
escopic arm. The equipment holder
locks into the desired position when
the release switch is released.
Switching on and off
(with telescopic arm)
1. Remove the blade guard (
14/17) before switching the de-
vice on.
2. Insert the safety key (
6) into
the device.
3. To switch on, hold the switch
lock (20) on the handle of the
telescopic arm and simultane-
ously press the on/off switch
(21). Release the switch lock,
device runs at top speed.
4. To turn it off, release the on/off
switch (21).
Working with the telescopic
arm
Slowly push the device on the wheels
over the oor. By doing so, you will
achieve an even cutting height.
Cleaning/Maintenance
Leave any work not covered in
this manual to our Service Cen-
tre. Only use original parts. There
is a risk of injury!
Ensure that the safety key ( 6)
is removed before all tasks.
Never use cleaning agents or sol-
vents, which can cause irreparable
damage to the unit. Chemicals can
attack the plastic components on
the unit.
Wear gloves when handling the
blades (
13/15). There is a risk
of injury from cuts!
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AGS 72-2 Lion - Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AGS 72-2 Lion - Set in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info