626716
96
Zoom out
Zoom in
Previous page
1/136
Next page
95
GB
Clean and service the unit regularly as fol-
lows. This guarantees a long life for your
unit:
Check the covers and guards for dam-
age and correct position. If necessary,
replace.
Keep the ventilation slits, motor hous-
ing and handles on the equipment
clean. To do this, use a damp cloth or
brush.
Always keep the blade clean.
After using the equipment, it is im-
perative to:
- Clean the blade
(with an oily cloth);
- Oil the blade shaft
with an oil can or
spray.
Slight notches on the blades can be
evened out. For this, sand down the
blades with an oil stone. Only sharp
blades can cut properly.
Blunt, bent or damaged blades must
be changed.
We are not liable for damage caused by
the use of the unit if the original cause
was improper repair or the use of non-
original parts or through use other than
that designated in this manual.
Storage
Keep the equipment in the blade
guard supplied, dry and out of reach
of children.
Store the battery only in a partially
charged state. The state of charge
should be 40 – 60 % (Battery half full:
Yellow + red light up) over a longer
storage period.
Store the equipment between 10° C
and 25° C. During storage, avoid ex-
treme cold or heat so the battery does
not lose power.
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3 months.
Disposal and the
environment
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have nished with
them.
Machines do not belong with do-
mestic waste.
Do not dispose of the device
with the battery installed in
household waste, re (risk of
explosion) or water. Damaged
batteries may damage the
environment and your health if
toxic fumes or liquids leak out.
Dispose of the equipment with the
battery discharged. Do not open the
equipment or the battery.
Dispose of the equipment in accord-
ance with the local regulations. Take the
equipment to a collection point, where
it will be recycled in an environmentally
friendly manner. For information about
this, ask your local waste management
company or our service centre.
Defective units returned to us will be
disposed of for free.
Place cut branches in compost and
not in the dustbin.
96


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AGS 72-2 Lion - Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AGS 72-2 Lion - Set in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info