626716
93
Zoom out
Zoom in
Previous page
1/136
Next page
92
GB
while charging it and make sure
that the safety key (
6) has
been removed.
There is a risk of injury from
electric shock.
Ensure that the equipment is
charged for no longer than
3-5 hours without interruption.
The battery and equipment could
be damaged and they consume
energy unnecessarily in case of
longer charging time. Overcharg-
ing invalidates the guarantee.
The machine must be supplied only
with SELV appropriate the mark on
machine.
Before initial use, charge the battery
installed in the equipment. Do not
charge the battery for several short
periods in succession.
Use the charger supplied to charge the
Li-ion battery installed in the equipment.
Recharge the battery if the equipment
runs too slowly.
In all cases, observe the applicable
safety information as well as the regu-
lations and directions for environmen-
tal protection.
Defects resulting from improper han-
dling are not subject to the guarantee.
To check the state of charge:
To display the state of charge of the bat-
tery, press the “Test” button on the state of
charge indicator (
2).:
Battery full:
Red + yellow + green light up
Battery half full:
Yellow + red light up
Battery empty:
Red lights up
1. Remove the safety key (6).
2. Connect the charger cable plug
(26) with the charger socket on
the tool (10).
3. Connect the power supply unit
(
25) to a socket.
The charging indicator (7) lights
up:
Red: Equipment charging.
Green: Charging nished.
The recommended charging time
is max. 3 – 5 hours.
4. After the recharging process
is completed, rst unplug the
charger from the wall outlet, and
then remove the charger cable
plug from the tool.
Operation
Keep to noise abatement regula-
tions and other by-laws.
Switching on and off
1. Remove the blade guard (14/17)
before switching the unit on.
2. Insert the safety key (6) into the
device.
3. To switch on, hold the switch lock
(4) depressed and operate the
on/off switch (8). Then release
the switch lock.
The equipment runs at top speed.
4. In order to switch off, let go of
the on/off switch (8).
After switching the unit off, the
blades take a short time to stop
moving. Let the blades come to a
complete standstill. Do not touch
the moving blades and do not try to
stop them moving. Injury hazard!
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AGS 72-2 Lion - Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AGS 72-2 Lion - Set in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info