626716
91
Zoom out
Zoom in
Previous page
1/136
Next page
90
GB
to hold on to material which is to be
cut. Only remove trapped clippings
when the tool is switched off. One mo-
ment of carelessness in the usage of the
hedge trimmer can lead to severe injury.
b) Carry the hedge trimmer at the han-
dle with an idle blade. Always pull on
the protective cover during transport
and storage of the hedge trimmer.
Careful handling of the tool reduces
the risk of injury from the blade.
c) Hold the power tool only on the insu-
lated handle surfaces, as the cutting
blade may come into contact with
concealed power cables. Contact be-
tween the cutting blade and a live cable
may render metallic components live
and result in an electric shock.
d) Before the work, search the hedge
for concealed objects, e.g. cable etc.
To avoid damaging the equipment.
e) Hold the hedge trimmer correctly, e.g.
with both hands on the handles, if
there are two handles. Loss of control
of the equipment may result in injuries.
f) Wear suitable clothing and work
clothes when working with the
equipment. Do not hold the equip-
ment by the cutting blade or lift it
on the cutting blade. Contact with
the cutting blade can cause injuries.
2) FURTHER SAFETY DIRECTIONS
For your personal safety:
Wear suitable work clothes such as
boots with non-slip soles, sturdy long
trousers, gloves and goggles. Hear-
ing protection must be used in case
the device is used over prolonged pe-
riods of time. Do not wear long ow-
ing clothing or jewellery, as this may
be caught by moving parts. Do not
use this tool while walking barefooted
or while wearing open sandals.
a) Only switch on the tool when
hands, feet and all other body parts
are at a secure distance to the tool.
Risk of injury from cuts.
b) Take care that you do not injure
your hands and feet with the cut-
ting elements.
c) Remove the power supply unit be-
fore working with the equipment.
Do not use extension cables. The
power supply unit is to be used
only in enclosed spaces. Water en-
try increases the risk of electric shock.
d) Do not use the shrub cutter in com-
bination with the telescopic shaft.
There is a risk of cut wounds.
e) The tool is designed to trim
hedges. Do not use the tool to cut
branches, hard wood or other. To
avoid damaging the equipment.
f) Do not attempt to dislodge a blocked/
trapped blade before switching the
tool off. There is a risk of injury.
g) Always switch off the tool and remove
the battery (if applicable)
- if you leave the tool unsupervised
- before removing jams
- before control- maintenance- or
cleaning tasks
- if you have come into contact with
a foreign object
- whenever the machine starts to
vibrate uncontrollably
Like upper shown to avoid accidents
and injuries.
3) SPECIAL SAFETY DIRECTIONS
FOR BATTERY-OPERATED TOOLS
a) Do not subject the battery to strong
sunlight over long periods and do not
leave it on a heater. Heat damages the
91


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grizzly AGS 72-2 Lion - Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grizzly AGS 72-2 Lion - Set in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 6,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info