644686

Greenworks 2600107 - 80V Pro Manual

19
Zoom out
Zoom in
Previous page
1/292
Next page
EN - 8
 Start: Press the ignition key 8.H)
and pull the starter lever
8.B).
 Stop: release the starter lever
8.B).
5.3 STARTER LEVER LOCK
It prevents accidental activation of
the starter lever. Press the ignition key
8.H) to release the starter lever.
5.4 DISCHARGE CHUTE
ADJUSTMENT HANDLE
This controls rotation of the discharge chute
so that snow discharge can be aimed in the
required direction. Turn the handle
9.E)
clockwise/anti-clockwise to adjust the chute.
5.5 DEFLECTOR ADJUSTMENT
Hold the handle
10.A) and press it to release
the
lock 10.B) to enable
regulation
10.C). Move the handle forward/
back to lower/lift the
pulling the handle.
Once the
is brought to the
desired position, releasing your grip
blocks the
(click).
6. USING THE MACHINE
IMPORTANT The safety regulations to
follow during machine use are described in
chap. 2. Strictly comply with these instructions
to avoid serious risks or hazards.
6.1 PREPARATION
 Check the auger has not already
taken in snow in the start position.
 Insert the battery in the
compartment
7 )
NOTE Before starting to clear the snow,
silicone spray should be applied to the auger
to avoid ice formation on the rotating units.
6.2 SAFETY CHECKS
After start-up and before using the machine,
it is essential to run the following safety
tests. Check the results of the safety
checks correspond to those in the table.
Always carry out the
safety checks before use.
6.2.1 General safety and auger
functionality check
Object Result
Press the release ignition
key
8.H).
Press the starter lever.
The motor starts and the
auger starts to rotate.
Test driving No abnormal vibrations.
No abnormal sound.
Release the starter lever. The motor and auger
stop immediately.
If any of the results fails to match
the indications provided in the following
table, do not use the machine! Take
it to a service centre to be checked
and repaired if necessary.
6.3 START-UP / OPERATION
The auger starts to rotate when
the snow thrower starts. Keep people
a safe distance away and check
the auger is not touching stones or
objects that could be launched.
6.3.1 Departure
1. Tilt the snow thrower slightly back and
lift the auger slightly
the ground.
2. Press and keep the starter lever
release pressed
8.H).
3. To start, pull the starter lever
8.B).
4. Release the starter lever.
If the auger is blocked, do not
attempt to operate the motor.
The machine is equipped with an automatic
"Motor save" protection when inserted, wait
a few minutes before re-starting the machine.
6.3.2 Operation
Lower the auger towards the ground
and start to remove snow.
Always stop the motor before
proceeding with release operations.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 2600107 - 80V Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 2600107 - 80V Pro in the language / languages: All languages as an attachment in your email.

The manual is 5,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info