Manual Greenworks 2600107 - 80V Pro (page 21 of 292) (All languages)

644686

Zoom out

Zoom in

1/292

EN - 10

7. MAINTENANCE

7.1 GENERAL INFORMATION

IMPORTANT The safety regulations to

follow during machine use are described in

par. 2.4. Strictly comply with these instructions

to avoid serious risks or hazards.

All service and all maintenance checks

must be carried out on a stationary machine

and remove the key from the compartment.

Wear adequate clothing, gloves

and goggles before carrying

out any maintenance.

 The frequency and types of maintenance

are summarised in the "Maintenance

Table". The table will help you maintain

your machine’s safety and performance.

It summarises the main interventions to

be made and the frequency applicable

to each of them. Carry out the relevant

intervention according to the

deadline.

 The use of non-genuine spare parts and

accessories could adversely

machine

operation and safety. The manufacturer shall

decline all liability in the event of injuries

or damages caused by such parts.

 Genuine spare parts are supplied by

authorized assistance workshops and dealers.

IMPORTANT All the maintenance and

adjustment operations not described

herein must be carried out by your dealer

or Authorised Service Centre.

7.2 CLEANING

Carry out cleaning operations with the

 Releasing the auger control.

 Removing the ignition key

 Removing the battery

Always clean the machine after use.

To clean the machine adhere to the

instructions provided below:

 Stop the motor

 Remove the battery from its compartment.

 Cool the snow thrower.

 Clean the snow thrower internally

and externally with an adequate

brush and/or compressed air.

Never wash the snow thrower with

water, otherwise the electric device will be

damaged causing the risk of electrocution.

8. STORAGE

If you intend to put your machine

away for more than 30 days:

1. Clean the snow thrower thoroughly.

2. Check for any damage. If necessary,

see to the necessary repairs.

3. If the paintwork is damaged,

touch it up to prevent rust.

4. Protect any exposed metal surfaces from rust.

9. ASSISTANCE AND REPAIRS

This manual provides all the necessary

information to run the machine and for correct

basic maintenance operations which can

be performed by the user. Any regulations

and maintenance operations not described

herein must be carried out by your Dealer

or Authorized Service Centre, which have

the necessary knowledge and equipment to

ensure that the work is carried out correctly,

maintaining the correct degree of safety and the

original operating conditions of the machine.

Any operations performed in unauthorized

centres or by

persons will totally

invalidate the Warranty and all obligations

and responsibilities of the Manufacturer.

 Only authorized service workshops can carry

out guaranteed repairs and maintenance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 2600107 - 80V Pro in the language / languages: All languages as an attachment in your email.

The manual is 5,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Greenworks 2600107 - 80V Pro Manual

Product: