644728

Greenworks 20157 - G-MAX 40V Manual

19
Zoom out
Zoom in
Previous page
1/124
Next page
ENGLISH
(Original instructions)
1
Ƈ Align the groove on the outside of the coupling end of the
handle (3) with the tongue on the inside of the coupling
end of the saw head (4). Push the saw head (4) onto the
handle (3).
Ƈ Slide the collar (14) upwards and rotate it counter-clockwise
until it is fully tightened.
Warning! Periodically check the connections to ensure that
they are tightened securely.
tube (9) between the saw head (4) and the handle (3).
Ƈ Align the groove on the outside of the coupling end of the
handle (3) with the tongue on the inside of the coupling
end of the extension tube (9).
Ƈ Push the extension tube (9) onto the handle (3).
Ƈ Slide the collar (15) upwards and rotate it counter-clockwise
until it is fully tightened.
Ƈ Align the groove on the outside of the coupling end of the
extension tube (9) with the tongue on the inside of the
coupling end of the saw head (4).
Ƈ Push the saw head (4) onto the extension tube (9).
Ƈ Slide the collar (14) upwards and rotate it counter-clockwise
until it is fully tightened.
Warning! Periodically check the connections to ensure that
they are tightened securely.
Ƈ To remove the saw head (4), rest the handle (3) on the
ground, loosen the collar (14) and take off the saw head.
Use
Warning! Let the tool work at its own pace. Do not
overload.
easily done before.
The battery may become warm while charging; this is normal
and does not indicate a problem.
Warning! Do not charge the battery at ambient
temperatures below 10°C or above 40°C. Recommended
charging temperature: approximately. 24°C.
Note: The charger will not charge a battery if the cell
temperature is below approximately 10°C or above 40°C.
Ƈ The battery should be left in the charger and the
charger will begin to charge automatically when the cell
temperature warms up or cools down.
Ƈ To charge the battery (10), remove it from the tool and
the charger in one way. Do not force. Be sure that the
battery is fully seated in the charger.
Ƈ Plug in the charger and switch on at the mains.
iulluminate
The charge is complete when the charging indicator (24)
lights green continuously. The charger and the battery can
red
tops off the battery charge. The charging indicator (24) will
be lit as long as the battery is connected to the plugged-in
charger.
Ƈ Charge discharged batteries within 1 week. Battery life
will be greatly diminished if stored in a discharged state.
Leaving the battery in the charger
The charger and battery pack can be left connected
pack fresh and fully charged.
Charger diagnostics
If the charger detects a weak or damaged battery, the
as follows:
Ƈ Re-insert the battery (10).
rate, use a different battery to determine if the charging
process works properly.
Ƈ If the replaced battery charges correctly, the original
battery is defective and should be returned to a service
centre for recycling.
Ƈ If the new battery gives the same indication as the
original battery, take the charger to be tested at an
authorised service centre.
Note: It may take as long as 60 minutes to determine that
the battery is defective.
For your safety, this tool is equipped with a double switching
system. This system prevents starting the tool inadvertently.
Switching on
Ƈ Push the lock-off button (2) backward using your thumb
and at the same time squeeze the on/off switch (1).
Ƈ Release the lock-off button (2).
Switching off
Ƈ Release the on/off switch (1).
Warning! Never attempt to lock a switch in the on position.
charger occasionally
9
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Greenworks 20157 - G-MAX 40V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Greenworks 20157 - G-MAX 40V in the language / languages: All languages as an attachment in your email.

The manual is 3,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info