747911
29
Zoom out
Zoom in
Previous page
1/48
Next page
Page 29 of 48 S1047.mz-16-V1.0-EN
Range Test
When the range test starts, the output of the transmier is signicantly
decreased. A praccal funconal test can therefore be performed at less
than 100 m or 300 . Aer the end of the range test, the transmier
switches back to full output power and the range test signal tone stops.
If necessary, ask someone for help.
1. Verify that the receiver and transmier are communicang properly
and that all control surfaces are funconal.
2. Place the model on a
at surface (cement, mowed lawn or ground)
with the receiver antenna at least 15 cm or 6 in above ground.
3. Hold the transmier at hip level at a slight distance from your body.
4. Start the range test in the "RF Set" menu by tapping the icon in the
“Range Test” field.
5. The me display begins to count down and a beep will sound
throughout the enre range test.
6. Move away from the model within the given 99 seconds range test
and move
the control scks while maintaining visual contact.
7. If you noce an interrupon in the connecon at any me within a
distance of about 50 m or 160 , try to reproduce it. Try to re-posion
the receiver antenna and repeat the range test.
8. If possible, switch on an exisng motor, to addionally check the
interference resistance.
9. Carry out the extended range test before starng up your model,
simulang all the control movements occurring in pracce. To
guarantee a safe model operaon, the range must always be at least
50 m or 160 on the ground.
CAUTION
Never start a range test on the transmitter during normal model operation!
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MZ-16 HoTT - S1047 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MZ-16 HoTT - S1047 in the language / languages: English as an attachment in your email.

The manual is 25,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MZ-16 HoTT - S1047

Graupner MZ-16 HoTT - S1047 User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info