30127
71
Zoom out
Zoom in
Previous page
1/144
Next page
the Down key.
7. Access the MIX 1 function by pressing the Up key.
8. Exit the FLAP SYSTEM function by pressing the
Down and Select keys simultaneously.
Differential aileron mixing
In order to use the Differential Function, flaperon or ele-
von (Delta), wing mixing must be selected in the Model
Set-Up Mode and two servos must be used to operate
the ailerons (one on each). In the Function Mode, use
the UP or DN key to select Differential Aileron Mixing
and access by pressing the UP and DN keys simulta-
nously.
Note: The Differential Aileron Mixing Function will
only be shown in the Function Model if either
Flaperon or Delta wing types have been pre-
viously selected in the System Mode.
Function mode AIRPLANE
Differential aileron mixing; Programmable Mixing (1~4)
Indicate present wing
type “FLAPERON“
or “ELEVON“
DIFFERENTIAL VALUE
(NORM 0% - 100%)
To Program Mixing
To flap system
Differential Value Inc-
reases or Decrease
Press to reset Diff-
erential
Value to factory pre-
set. (NORM 100%)
Differential Value
NORM
(DIFF)
SPLIT
0%
50%
100%
Programmable Mixing (1~4)
The mx-12 offers four programmable mixes to be used
for any number of different purposes. This function al-
lows mixing any one channel to any other channel. This
mix can remain on at all times or be switched on and off
in flight using a number of different switches.
Mix numbers 1-3 are of the standard variety, in that the
digital trim for the master channel only affect the master
channel, and not the slave channel. Mix number 4 is
of the “Trim Include“ variety. This mix is used any time
the mix requires the slave channels trim position to be
varied when the master channels digital trim position is
varied. An example for this type of mix would be when
dual elevator or dual aileron servos are used and con-
nected to two separate channels of the system, rather
than using a single channel with a Y-harness.
Each channel of this radio is identified by an abbre-
viated name. The chart below indicates the channel
and its corresponding abbreviation. The channel name
apperaing first is known as the “master channel“ or the
channel to which you want to mix. The second number
is known as the “slave channel“ or the channel that is
being mixed into the master channel. For example,
AILRUD would indicate aileron-to-rudder mixing.
Each time the aileron stick is moved, the aileron will
deflect, and the rudder will automatically move in the
direction and to the value input. Mixing is proportional,
so small inputs of the master channel will produce small
outputs of the slave channel. Each programmable mix
has a mixing “offset“. The purpose of the mixing offset is
to re-define the neutral position of the slave channel.
Accessing the Programmable Mixing Function
Master Channel
Slave Channel
Offset Value
(+/- 125)
Mixing percentages
(+/- 125)
Mixing switch selection
SWITCH
ALWAYS ON: Always Mixing On
RIGHT FWD: Gear SW Forward sideOn
RIGHT REA: Gear SW Rear sideOn
LEFT FWD: FLAP SW Forward sideOn
LEFT REA: FLAP SW Rear sideOn
AILE D/R: AILE D/R SW Position 1On
ELEV D/R: ELEV D/R SW Position 1On
Go to Fail Safe menu
Go to Differential
Change highlighted
selection
Change selected value
Reset selection to
default
Function mode AIRPLANE 23
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX12 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX12 in the language / languages: English, German, French as an attachment in your email.

The manual is 15,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX12

Graupner MX12 User Manual - English - 48 pages

Graupner MX12 User Manual - Dutch - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info