467107
171
Zoom out
Zoom in
Previous page
1/200
Next page
171
Programming example - fixed-wing model
I5
I6
I7
+
trv
I8
free
free
+100%
+100%
+100%
+100%
+100%
+100%
+100%
+100%
free
3
In the third column you can adjust servo travel to suit the
speed controller you are using; alternatively you could
use the “Servo travel” column in the
“Servo settings” menu (page 92).
S4
S5
S6
r ev cent
+
trav
0%
0%
0%
100%
100%
100%
100%
100%
100%
0%
0%
100%
100%
100%
100%
S7
S8
The last stage is to check the settings, so move from
the basic display to “Servo display by simultaneously
touching the  buttons of the left-hand touch-key: in
the switch’s “OFF” position, the control channel you have
selected - in our example this is channel “8” - should be
at -100%, and at the “full-throttle” setting at +100%.
Example 3
Using one of the three-position switches SW 4/5 or
6/7
This variant implements a three-stage solution for
switching an electric motor on and off, and also results
in an “abrupt “ motor start-up … unless the speed con-
troller you are using features what is known as a “soft
start” function.
At the receiving end you need a suitable speed controller.
Example 2
Using a two-position switch, SW 2, 3 or 8
This variant implements a pure ON / OFF function, and
results in the motor starting “abruptly” … unless the
speed controller you are using features what is known
as a “soft start” function.
At the receiving end you need either a simple electronic
switch or - if you want a smoother motor start - a suit-
able speed controller.
The settings for this arrangement are entered in the …
“Transmitter control settings” menu (page 94)
First check which receiver socket (5 or higher) is avail-
able for connection to your speed controller. If you have
assigned two aileron servos in the Base settings
menu, and if you have not connected any other auxiliary
function, then this would be channel 6; if your model
features two aileron servos and two flap servos, then
channel 8 would be available for connecting the speed
controller; the latter option is the one we wish to use in
this example.
First set the selected switch to the “OFF” position, then
use the arrow buttons  of the left or right-hand
touch-key to select the desired line in the menu. Touch
the central SET button of the right-hand touch-key to
activate “Switch / transmitter control assignment”, then
move the selected switch from the “OFF” position to
the “ON” position. The highlighted field now shows the
switch number together with a symbol which indicates
the direction of switching:
First check which receiver socket (5 or higher) is avail-
able to connect your speed controller. If you have as-
signed two aileron servos in the Base settings” menu,
and if you have not connected any other auxiliary func-
tion, then this would be channel 6; if your model features
two aileron servos and two flap servos, then channel 8
would be available for connecting the speed controller;
the latter option is the one we will use in this example.
Move to the …
“Transmitter control settings” menu (page 94)
… and use the arrow buttons  of the left or right-
hand touch-key to select the desired line. Briefly press
the central SET button of the right-hand touch-key to
activate “Switch / transmitter control assignment”. Move
the selected three-position switch; the highlighted field
now shows the number of this transmitter control, for
example “Transmitter control 9”.
I5
I6
I7
+
trv
I8
ctrl 9
free
free
+100%
+100%
+100%
+100%
+100%
+100%
+100%
+100%
free
In the third column you can adjust servo travel to suit the
speed controller you are using; alternatively you could
use the “Servo travel” column in the
171


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info