467107
160
Zoom out
Zoom in
Previous page
1/200
Next page
160
Program description: Trainer system
First initiate the “BINDING” process at the Pupil trans-
mitter by briefly pressing the central SET button of the
right-hand four-way button …
–P
T
2 3
4
5
6
7 8
BIND:SW: –––
1
BINDING
TRAINER/Pupil
… and immediately afterwards that of the Teacher
transmitter:
T
1 2 3
4
5
6
7 8
BIND:
SW: 9
P
BINDING
TRAINER/Teach
As soon as this process is concluded, both screens dis-
play “ON” instead of the flashing message “BINDING”:
T
1 2 3
4
5
6
7 8
BIND: ON
SW: 9
P
TRAINER/Teach
–P
T
2 3
4
5
6
7 8
BIND: ON
SW: –––
1
TRAINER/Pupil
This concludes the binding process, and you can return
to the basic display of both transmitters, and start trainer
mode operations - once you have checked the operation
of all the functions.
However, if neither transmitter, or only one of the trans-
mitters, displays “ON”, indicating that the binding proce-
dure has failed, try changing the relative position of the
two transmitters, and repeat the whole procedure.
Important note:
It is essential to check that all functions are trans-
ferred correctly to the prepared model BEFORE
initiating Trainer mode operations.
During …
Trainer mode operations
… it is no problem for the Teacher and Pupil to stand
a little way apart. However, you should never exceed a
distance of 50 m (this is known as the call range), and
no other persons should stand between the Teacher and
Pupil, as this could reduce the effective range.
In this mode of operation the basic display of the Teach-
er transmitter looks like this …
GRAUBELE
#01
2:22h
stop
flt
«normal »
0:00
0:00
5.5V
5.2V
HoTT
P
RFC–Teach
… and that of the Pupil transmitter typically like this:
GRAUBELE
#09
1:11h
stop
flt
0:00
0:00
4.9V
HoTT
RFC-Pupil
If it should occur that the link between the Teacher and
Pupil transmitters is lost during Trainer mode operations,
note that the Teacher transmitter automatically assumes
control of the model.
In this situation, if the Trainer change-over switch is in
the “Pupil” position, then the central LED on the Teacher
transmitter starts to flash blue / red for the duration of
the signal loss, and the transmitter emits audible warn-
ing signals. At the same time “RFC-” flashes in the basic
display, and the following warning is displayed:
no
student
signal
However, if only “RFC-” flashes in the basic transmitter
display, and - relatively quiet - audible signals are heard
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info