467107

Graupner MX-16 HoTT Manual

159
Zoom out
Zoom in
Previous page
1/200
Next page
159
Program description: Trainer system
–P
T
2 3
4
5
6
7 8
BIND: N/A
SW: –––
1
TRAINER/Pupil
Teacher transmitter
Up to eight of the Teacher transmitter’s (“Teacher”)
transmitter control functions can be transferred to the
Pupil transmitter (“Pupil”), either individually or in any
combination.
For this reason the bottom line of the screen, marked
“L”, indicates those function inputs which are perma-
nently associated with control functions 1 … 4 (dual-axis
stick functions on fixed-wing models and helicopters), as
well as the freely assignable inputs 5 … 8 of the “Trans-
mitter control settings” menu.
Note:
In principle it makes no difference which individual
transmitter controls are assigned to the inputs which are
to be transferred to the pupil. However, they can only be
assigned in the “Transmitter control settings” menu
with the Trainer connection switched off.
Use the arrow buttons  of the left or right-hand
touch-key to select the transmitter controls 1 to 8 () to
be transferred to the pupil, and briefly press the central
SET button of the right-hand touch-key in each case, so
that they switch from “T (Teacher)” (
) to “P (Pupil)” ( ):
–P
T
1 2 3
4
6
7 8
5
BIND:SW: –––
N/A
TRAINER/Pupil
You still have to assign a Trainer transfer switch on the
right of the screen so that you can actually transfer
control to the Pupil. This is accomplished by using the
arrow buttons of the left or right-hand touch-key to place
the marker frame next to “SW” at bottom left, and assign
a switch as described on page 49.
We recommend that you use one of the two momentary
switches SW 1 or SW 9 as the transfer switch, to ensure
that the Teacher transmitter can regain control instantly
at any time:
T
1 7 8
BIND:SW:
N/A
9
TRAINER/Teach
–P
No
student
signal
Since it is very unlikely that a prepared (i. e. ready for
use) Pupil transmitter will already be connected to a
Teacher transmitter at this early stage of programming a
Trainer system, the transmitter will generate appropriate
visual and audible warnings when the switch is operated
as part of the switch assignment procedure. You should
therefore re-open the switch once you have assigned it:
T
1 2 3
4
5
6
7 8
P
BIND:SW:
N/A
9
TRAINER/Teach
Note:
The switch assignment procedure described above
determines which transmitter provides the Teacher
function, and which provides the Pupil function. For this
reason a switch must NEVER be assigned to the Pupil
transmitter in this menu. To underline this, the menu
headline switches from “TRAINER / pupil” to “TRAI-
NER / teacher” as soon as a switch is assigned.
Now use the arrow buttons of the left or right-hand
touch-key to move the marker to “BIND: N/A” on the
right:
T
1 2 3
4
5
6
7 8
P
BIND:SW:
N/A
9
TRAINER/Teach
Binding the Pupil transmitter to the Teacher trans-
mitter
Note:
During the binding procedure the distance between the
two transmitters should not be too great. You may need
to change the relative position of the two transmitters
and initiate the binding process a second time.
… 159 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info