467107
132
Zoom out
Zoom in
Previous page
1/200
Next page
132
Program description: Swashplate mixers - model helicopter
SP – MIXER
ptch
roll
nick
+61%
+61%
+61%
In the “Swashplate” line of the “Base settings menu
you have already defined the number of servos which
are installed in your helicopter to provide collective pitch
control; see page 82. With this information the transmit-
ter software automatically superimposes the functions
for roll, pitch-axis and collective pitch as required, i. e.
you do not need to define any additional mixers yourself.
If you have a model helicopter which only has a single
collective pitch servo, the “Swashplate mixer” menu
point is - of course - superfluous, since the three swash-
plate servos for collective pitch, pitch-axis and roll are
controlled independently of each other, i. e. no mixers
are used. In this case the swashplate mixer menu does
not appear in the multi-function list. With all other swash-
plate linkages employing 2 … 4 collective pitch servos,
the mixer ratios and directions are set up by default, as
can be seen in the screen shot above. The pre-set value
is +61% in each case, but the value can be varied within
the range -100% to +100% using the arrow buttons of
the right-hand touch-key, after touching the central SET
button of the same touch-key.
Simultaneously pressing the two arrow buttons  or
 of the right-hand touch-key (CLEAR) resets the
mixer input in the highlighted field to the default value of
+61%.
If the swashplate control system (collective pitch, roll
and pitch-axis) does not follow the transmitter sticks in
Swashplate mixers
Collective pitch, roll and pitch-axis mixers
the proper manner, then the first step is to change the
mixer directions (“+” or “-”), before you attempt to correct
the directions of servo rotation.
Note:
Ensure that the servos do not strike their mechanical
end-stops if you change the mixer values.
MIX1 8 1
trv
+25%
+25%
0%offs
ASYSYM
132


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info