467107
85
Zoom out
Zoom in
Previous page
1/200
Next page
85
Program description: base settings - model helicopter
the original value once you have stored the switch-
ing threshold.
Direction of rotation of main rotor
mod name
stick mode
rotor direct
swashplate
1
right
3sv(2rol)
cut off
STARLET
–125% +100%
1
In the “Rotor direction” line you enter the direction of
rotation of the main rotor using the arrow buttons of the
right-hand touch-key, after briefly pressing the central
SET button:
“right”: the main rotor spins clockwise as viewed from
above.
“left”: the main rotor spins anti-clockwise as viewed
from above.
Simultaneously touching the  or  buttons of the
right-hand touch-key (CLEAR) switches to “right”.
right-hand
rotation
left-hand
rotation
The program requires this information in order to set up
the mixers to work in the correct “sense”; this applies to
the mixers which compensate for rotor torque and motor
power. You will find these in the Helicopter mixer
menu:
Pitch
Ch1 throttle
Ch1 tail rotor
Collective pitch min.
stick mode
rotor direct
swashplate
1
right
3sv(2rol)
cut off –125% +100%
1
pitch min
rear
In the “Collective pitch min. line you can set up the
direction of operation of the throttle / collective pitch
stick to suit your preference. This setting is crucial to the
correct operation of all the other options in the helicopter
program which affect the throttle and collective pitch
functions, i. e. the throttle curve, idle trim, tail rotor mixer
etc.
Briefly touch the central SET button of the right-hand
touch-key, and the direction of operation of the throttle /
collective pitch stick is highlighted. Now you can select
the required variant using the arrow buttons of the right-
hand touch-key:
Pitch
The meaning is as follows:
“front”: minimum collective pitch when the collective
pitch stick (Ch 1) is “forward” (away from you);
“rear”: minimum collective pitch when the collective
pitch stick (Ch 1) is “back” (towards you).
Simultaneously pressing the  or  buttons of
the right-hand touch-key (CLEAR) returns the collective
pitch min. position to “rear”.
Note:
The Ch 1 trim always affects the throttle servo only.•
By default what is known as the “throttle limiter” is set •
(see page 99); this limits the travel of the throttle ser-
vo in the direction of maximum throttle, acting sepa-
rately from the collective pitch servos. This point can
be programmed using the Lim input in the “Trans-
mitter control settings menu.
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info