467107

Graupner MX-16 HoTT Manual

79
Zoom out
Zoom in
Previous page
1/200
Next page
79
Program description: base settings - fixed-wing model
switches assigned to phase 3 or 4 is also closed, or
phase 3, if the switches assigned to phases 3 and 4
are closed.
As a result you may wish to take the inherent phase •
priorities into account when assigning names to the
flight phases; see below.
At the servo end the transition does not occur •
“abruptly”, but with a fixed transition period of about
one second.
Programming
When you select “phase 2”, “phase 3” or “phase 4” using
the arrow buttons  of the left or right-hand touch-
key, the “Name” field for that flight phase is already
framed.
If the default name does not seem appropriate, touch
the central SET button of the right-hand touch-key, and
the current setting is shown highlighted. Now use the
arrow buttons of the right-hand touch-key to select an
appropriate name from those available. Touch the SET
button to conclude the input process.
Now press the button of the left or right-hand touch-
key to move to the right-hand column at the bottom of
the screen, indicated by the switch symbol
, and
briefly touch the central SET button. You can now assign
a switch to the phase as described on page 57. We
recommend one of the two three-position switches SW
4/5 or SW 6/7, in each case starting from the centre
toggle position.
For more information on flight phase programming
please refer to page 106, in the section entitled “Phase
trim”.
Receiver output
For maximum flexibility in terms of receiver socket
assignment, the mx-16 HoTT software provides the
means to swap over the servo outputs 1 to max. 8;
this is carried out on the second page of the “Receiver
output” sub-menu.
10:01 2
phase 2
phase 3
phase 4
takeoff
landing
speed
–––
timer
7
6
receiv out
Touch the central SET button of the right-hand touch-key
to move to the next page of the display. Here you can
assign the “control channels” for servos 1 … 8 to any
receiver output you wish to use. However, please note
that the display in “Servo display” - which you can ac-
cess from virtually any menu position by simultaneously
touching the and buttons of the left-hand touch-
key - refers exclusively to the “control channels”, i. e. the
outputs are NOT swapped over.
S
S
S
S
1
2
3
4
1
2
3
4
output
S
5
5
output
output
output
output
Use the arrow buttons  of the left or right-hand
touch-key to select the servo / output combination you
wish to change, then touch the central SET button of the
right-hand touch-key. Now you can assign the desired
servo (S) to the selected output using the right-hand
arrow buttons, and confirm your choice with SET … or
alternatively touch the  or  buttons of the right-
hand touch-key (CLEAR) simultaneously to revert to the
default sequence.
Please note that any subsequent changes to servo
settings, such as servo travel, Dual Rate / Expo, mixers
etc., must be carried out according to the original
(default) receiver socket sequence.
Note:
It is also possible to distribute the control functions
amongst as many receivers as you wish, using the
channel-mapping function in the mx-16 HoTT’s inte-
gral Telemetry menu, or even to assign the same control
function to multiple receiver outputs. For example, you
might wish to actuate each aileron with two servos in-
stead of just one, etc. However, we strongly recommend
that you use only one of the two options, as a combina-
tion will soon lead to confusion.
rx bind
Graupner|SJ HoTT receivers have to be “instructed” to
communicate exclusively with a particular model (i. e.
model memory) of a Graupner|SJ HoTT transmitter. This
process is known as “binding”, and is only necessary
once for each new combination of receiver and model. It
can be repeated at any time.
Important note:
When carrying out the binding procedure, please
ensure that the transmitter aerial is always an
adequate distance from the receiver aerials: keeping
the aerials about 1 m apart is safe in this respect.
Otherwise you risk a failed connection to the down-
link channel, and consequent malfunctions.
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MX-16 HoTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MX-16 HoTT in the language / languages: English as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MX-16 HoTT

Graupner MX-16 HoTT User Manual - Dutch - 188 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info