747992
42
Zoom out
Zoom in
Previous page
1/80
Next page
42 / 80 33028_mc_28_Teil2_jh
Good to know:
What is a mixer?
Each model memory has 8 freely programmable linear mixers, 4
freely programmable curve mixers and 4 cross-mixers. These mixers
allow a control signal from one control to be mixed with another
channel. Depending on the type of mixer, this can be adjusted lin-
early, in the form of a curve or crosswise.
There are pre-programmed mixers in the "Wing mix" menu.
Wing Mix
The mixers that appear in this menu are dependent on the settings
in the "Model type" menu. The individual options of the "Wing mix"
menu are described separately according to 1-, 2- and multi-flap
models.
Principle differentiation of ailerons and flaps
Aile.diff. /Diff.
The aileron differentiation is used to compensate for the negative
winding torque occurring with the aileron extension. In this case, the
path of the aileron, which moves downwards, is correspondingly
reduced. The aileron differentiation should always be used with all
gliders. The aileron differentiation also works with motorl models
depending on the airfoil profile. The adjustment range of ±100%
allows you to adjust different deflection on the right side, indepen-
dent of the direction of rotation of the aileron servos. 0% corre-
sponds to normal deflection (no differentiation), and -100% or +100%
corresponds to the split function.
Diff.
In the top line "AILE" of the multi-flap menu (described later),
set the percentage of the flaps the ailerons are affected by the aile-
ron control stick. Two-line underneaths, in the line "Diff." adjust the
flap differentiation to compensate for the aileron deflection of the
flaps. The adjustment range of ±100% allows a correct adjustment
of the differentiation independent of the direction of rotation of the
servos. A value of 0% corresponds to the normal turning. The servo
travel downwards is equal to the servo travel upwards. -100% or
+100% means that the path downwards is reduced to zero ("split"
operation) in the aileron control of the flaps.
Free mixers
MIX active/phase
Phase timers
Wing mixers
MIX-only channel
Dual mixer
Aile.diff.
Brake settings
AI 0%
Wing mixers
FL EL 0%0%
–––
–––
RU
Normal
0%
0%
fl.pos
AILE
Normal
Diff.
AI-tr.
AI 0%
0%
0%
0% (normal)
50% (differential)
100% (Split)
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info