747992
40
Zoom out
Zoom in
Previous page
1/80
Next page
40 / 80 33028_mc_28_Teil2_jh
Defined as "stopwatch" or "motor runtime", the timer adds the
switch-on time. If a value is not set in the "Timer" column, the timer
counts up. If a value is set, the timer counts backward from this
value.
The buttons t u or  of the right touch-pad reset the timer in
the basic display to "0:00h".
In the "Alarm" column, you can specify a time at which an audible
alarm is emitted. Move the marking frame with the selection key
over the "Timer" column to the right side to reach the column.
When the set time has elapsed, the announcement will sound "zero"
and the timer will be highlighted in the basic display. This function is
only available when the timer is backwards.
Log-time (Log-time - Total flight time)
When this timer is set, the telemetry data is logged on the SD card.
All other functions are like the "Stop / Motor" timers.
Use example
Default: "Stopwatch" and "Log timer" should be started simultane-
ously via the CH1 stick (throttle stick) as soon as a defined switching
point is exceeded.
Solution: For this purpose, a "G1" switch is first defined in the "Con-
trol switch" menu.
Change in the "Control switch" menu. In line G1, press the SET but-
ton and then move your throttle stick to the desired switch point
position.
Select the column STO, tap on the SET button and the position will
be stored.
The control switch "G1" is then assigned in the "Timer" (general)
menu. In the "Log-timer" and "Stop" lines on the far right of the "
" column assign the "G1" switch (tap 3x the SET button).
The stopwatch is now stopped below the switching point and con-
tinues above the switching point. The log timer can only be stopped
by pressing the ESC key when the stopwatch is stopped.
Model time
Batt. time
Top:
Centr:Log t.
Alarm
–––
12:34h
1:23h
0s
0s
Stop C1
SEL
C1
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info