747992
38
Zoom out
Zoom in
Previous page
1/80
Next page
38 / 80 33028_mc_28_Teil2_jh
Announce
Here you can select an announce for each phase. The announce can
be selected from the supplied voice pack or from a user voice pack.
Switching to the corresponding phase reproduces the announce.
Phase assignation
In this menu, you can assign a switch or switch combination to the
phases.
Priorities
If no phase switches have been assigned you are in phase "1". When
you start programming phases, this phase must be designed with
the phase name "Normal" in the "Phase settings" menu (described
above). The phase switch "A" has priority over all subsequent switch
positions "B" to "F". The phase switch "B" has priority over all subse-
quent switch positions "C" to "F", etc.
Assigning the switch
Use the selection keys to select the desired position, then press
the SET button
Move the desired switch
Assigning the phase and the switch position
Use the selection keys to highlight the field at the bottom right
and tap the SET button
Move the desired switch or switch combination
Select the desired phase name
Phase trim
In this menu, enter the phase-dependent trim settings for the wing
controls. The available flaps that appear depend on the setting in the
"Model type" menu. (ELE, AILE, AILE2, FLAP, FLAP2)
Setting the trim values:
Select the desired phase
Select the desired control surfaces (additional control surfaces
on the right are available if a triangle is shown at the bottom left)
Tap on the SET button, input the trim value
The values of these four columns are identical to those of the line
"FLAP Pos" (flap position) in the "Multi-flap menu" of the "Wing
mixer" menu. Changes always act directly on the other side of the
other menus.
Pha1
Pha2
Pha3
Announce
Pha4
Pha5
normal
Start
Strecke
Phase settings
Phase trim
Announce
Timers (general)
Non-delayed chan
Phase assignment
Phase assignment
prior
A B C D E F
1 Normal
combi
Phase assignment
A B C D E F
1 Normal
265
prior
combi
Phase assignment
A B C D E F
265
2 Start
prior
combi
Phase settings
Phase assignment
Announce
Timers (general)
Non-delayed chan
Phase trim
Normal
0%
ELEV
Start
0%
AI
Start
Thermal
Tr a c k
0% 0%
0% 0%
0% 0%
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info