747992
43
Zoom out
Zoom in
Previous page
1/80
Next page
43 / 80
33028_mc_28_Teil2_jh
Programming of the wing type
Model type: "1AIL"
If "1AIL" in the "Aile/Flap" line of the "Model type" menu has been
entered, the "Mixer menu" of your transmitter corresponds to the
figure on the left. All available parameters can be changed depend-
ing on the phase, egardless of the selected combination of ailerons
and flaps.
Brake setting
The "Brake settings" menu is not shown if “yes” has been entered in
the "Model type" menu "Motor on CH1 front / rear" and in the col-
umn "Motor" of the "Phase setting" menu for the currently active
phase. With one aileron servo in the model neither a Butterfly nor a
differentiation reduction can be enabled. There are no further set-
ting options here besides the "Travel" in the submenu "Elevator
curve".
For detailed information on how to set a curve mixer, see the "Throt-
tle curve" menu item.
Aile -> Dir
The rudder also moves to an adjustable degree when the aileron is
operated. The adjustable rudder can compensate for the negative
torque in conjunction with aileron differentiation. The combination
smoothes curves in flight. The rudder remains separately controlla-
ble. The setting range of ±150 % enables you to adapt to the direc-
tion of deflection. Optionally, this mixer can be turned on and off by
one of the positioning switches or controls. The model can be con-
trolled exclusively using the aileron or rudder.
Model type: "1AIL 1FLAP"
The “Mixer menu” of the transmitter corresponds to the figure on
the left if you have entered "1AIL 1FLAP" in the "Aile/Flap" line of the
"Model type" menu. All available parameters can be changed
depending on the phase, regardless of the selected combination of
ailerons and flaps,.
Brake setting
The "Brake settings" menu is not shown if “yes” has been entered in
the "Model type" menu "Motor on CH1 front / rear" and in the col-
umn "Motor" of the "Phase setting" menu for the currently active
phase.
The flap is lowered when a suitable value is entered in the "Butter-
fly" line. This function is enabled by the brake control (Throttle con-
trol stick). Move the brake control to the stop in the brake position.
Then, after briefly pressing the SET button, use the selection keys to
set a suitable value. To achieve sufficient braking, the flap must be
lowered as far as mechanically possible.
Elevator CURVE
Apply a correspondingly automatic effective admixture to the eleva-
tor. This prevents you from having to intervene with the elevator
Brake settings
AI 0%
Wing mixers
–––
RU
Normal
Input
Output
Point ?
–100%
0%
0%
Brake
normal
Ele
Curve off
Normal
Brake settings
AI 0%
Wing mixers
EL FL 0%
0%
–––
–––
RU
Normal
FL EL 0%
0% –––
Ele curve
Brake settings
Butt.
Normal
0%
FL
Input
Output
Point ?
–100%
0%
0%
Brake
normal
Ele
Curve off
Normal
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC26 in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC26

Graupner MC26 User Manual - German - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info