30117
14
Zoom out
Zoom in
Previous page
1/104
Next page
System Menu
Using the system for the first time and programming
the basic transmitter data
14 System Menu
Software Structure
The software is divided into two menus, which are
activated in different ways.
1. System Menu
Adjusting the basic transmitter functions.
2. Set-Up Menu
Selecting, activating and programming the model
specific data.
In each of these menus, the individual codes can be
called up in rotation by the ROLL UP (upwards) or
ROLL DN (Roll Down, downwards) buttons. When
you reach the bottom code, the ROTART SELECT
system returns you to the start of the list again, until
you either leave the System or Set-Up Menu by
pressing ENTER ( ROLL UP and ROLL DN keys
simultaneously), or by switching off the transmitter
and thereby resetting it to normal operation.
To prevent accidental reprogramming, the System
Menu can only be activated if the transmitter is
switched off first. This makes it impossible for you to
accidentally alter programmed these functions, e.g.
switching model memory or changing modulation
mode (FM-PPM/PCM), while you are using the
system to control a model. Since the transmitter is
not producing a modulated signal in this mode, it is
impossible to transmit a signal to the receiver during
this basic programming.
Basic method of using the System Menu
First you need to select the code you wish to alter by
pressing the ROLL UP or ROLL DN button. Within
this code, you select the function you require using
the INC or DEC buttons.
Entering the System Menu
Simultaneously press the ROLL UP and ROLL DN
buttons (= ENTER ) whilst turning the transmitter on.
An acoustic signal sounds. The program is now in
the System Menu. The accompanying flow chart
shows the programs of the primary system, whose
functions are shown in the transmitter display. By
repeat pressing of ENTER the software leaves the
basic programming and automatically returns to
normal transmitter operation.
Block diagram of the System Menu
Leave the Menu at any place with ENTER .
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info