30117
13
Zoom out
Zoom in
Previous page
1/104
Next page
Multi Data Terminal
General Section 13
Multi Data Information Display
The clear LCD MULTIDATA display with a static
driver, was developed for the mc-16/20 Computer
System. It offers a improved safety during operation,
since all important functions are displayed. Even in
bright sunlight, all the parameters on the display are
represented in high contrast.
Possible screen-displays of the
"Basic Transmitter Information":
Normal operation
Three figure model name (or model number and
type) and battery condition (under load) in volts. On
pressing of the CLEAR key the current modulation
mode is briefly displayed in place of the model name,
as "F" (FM-PPM) or "C" (PCM) in conjunction with
the type of model "FL, UN, Fb, AC or HE".
Stop watch / alarm timer
(see pages 23 - 24)
The upper display line changes, as soon as CH SEL
is pressed.
Battery alarm
When the battery voltage drops under 9.0v the
display alternating between the normal data and
“BAT” caption. An audible warning signal sounds in
parallel to it seven times consecutively. Landing of a
model aircraft must made immediately after the
"BAT" alarm display is reached, to allow recharging
of transmitter battery.
Operation of the Multi Data Input Terminal
The program of the Transmitter is organised and
uses only six keys for simple and clear programming.
If a key remain pressed continuously, the instruction
and setting codes automatically change with
increased rate until the key is released.
Scroll through the menu of available
options: upwards.
Scroll through the menu of available
options: downwards.
Pressed Simultaneously
= +
Programming mode is entered and
left (when both buttons pressed
together).
Channel Selection and branching
forwards into subroutines.
Note:
The function of the INC and DEC keys can
undertaken by a 2 way momentary switch, Part.
No. 4160.44, which is connected to the sockets on
the circuit board in the Transmitter intended for this
function.
Pressed Simultaneously
= +
Channel Selection and branching
backwards into subroutines (when
both buttons pressed together).
Adjustment key for increasing values
in Direct Mode.
Adjustment key for decreasing values
in Direct Mode.
Delete key, resetting adjustments to
default values.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info