30117
6
Zoom out
Zoom in
Previous page
1/104
Next page
Operating Instructions
6 General Section
Opening the Transmitter case
The removable back of the case is held by one
locking catch and two interlock sliding catches.
Before opening the Transmitter ensure the power
switch is OFF. The sliding catches are moved
against the direction of arrow (inward) until they hit
the stop, then case back can be opened. To close,
insert the case back into the housing at the lower
edge. Push it closed and then slide both caches in
direction of the arrow (outward).
Changing the proportional control sticks and
changing the centring force.
Both vertical control stick directions can be changed
between centring or non-centring (e.g. throttle on the
right or left). With the transmitter open and at the
appropriate centring lever, notice the feather/spring
(figure below. Lift up the centring lever to be able to
get access, remove and keep the spring.
In the case of mechanical conversion of the throttle
function, an electronic conversion of the control
functions must also be made using the code "MOD"
during the basic transmitter programming, see page
15. The ratchet strap provided in the accessories is
mounted to the two captive nuts on the inside of the
control stick units (photograph on the right).
The resistance to movement of the control stick can
be adjusted between low to high by tightening or
loosening of the adjusting screw.
The centring force of the control sticks can be
adjusted at the screws indicated in the figure by an
arrow:
Clockwise rotation – centring force higher
Anti-clockwise rotation - centring force lower
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC16 in the language / languages: English as an attachment in your email.

The manual is 16,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC16

Graupner MC16 User Manual - German - 68 pages

Graupner MC16 User Manual - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info