Manual Graupner MC 32 HOTT (page 280 of 345) (English)

467111

280

Zoom out

Zoom in

1/345

280 Program description - Basic settings

Note:

To restart the transmitter after an automatic

shut-off, rst push the transmitter's power

switch to the right into its "OFF" position then,

after about ve seconds, again into its "ON" position

(toward the antenna).

Touch Sense

SEL

Battery type Li-Io

GENERAL BASIC SETTINGS

Battery warning 3.60V

Stick warning unlim

Touch Sense 2

In this line you can select the touch sensitivity of the

touch pads in a range from 1 to 10. The lower this

number is, the more sensitive the touch pad will be to

taps and vice versa.

A simultaneous tap on the  or  selection keys

of the right touch pad (CLEAR) will reset the ﬁeld

shown in inverse video back to "2".

DATA sel

Firmware version V1102 and higher

From ﬁrmware version V1102 it can be connected

to the Data socket not only a Smart-Box or alterna-

tively an external RF module, but also the external

Bluetooth module of MZ transmitter, No. 8351 can be

operated. The data protocol consequently required in

each case on the “Data jack” can be selected in the

“DATA SEL.” line:

SEL

DATA sel Telemetry

GENERAL BASIC SETTINGS

Battery warning 3.60V

Stick warning unlim

Touch Sense 2

“Telemetry”

The signal data protocol at the data socket corre-

sponds to the previous protocol and is suitable for

connecting an external RF module and the data out-

put on the Smart-Box under the menu “EXTERNAL

MONITOR”.

“Bluetooth”

The signal at the data socket Data Protocol is to

meet the needs of the external Bluetooth module, No.

8351, matched and thus particularly for the transmis-

sion of telemetry data and any language editions on

the suitable “Graupner HoTT Viewer App for Android”

compatible smartphones and / or tablets.

The output via “Bluetooth” mode data can be

authenticated in a rudimentary when needed

using the Smart Box and the option “MODEL

SELECT”.

Note for Smart-Box:

The menus under the heading “SETTING

AND DATA VIEW” complement HoTT trans-

mitter of the ﬁrst generation to the functions

of the same menu item in today’s HoTT transmitter

telemetry menu, see section “Set view” on page 238.

Completely regardless of directly connected to the

Smart Box sensors it can be adjusted at any time and

displayed with the help of these menu items.

When a receiver is directly connected, however, the

display of the Smart box remains empty.

Own phase name 1 … 10

GENERAL BASIC SETTINGS

Stick warning unlim

Touch sense 2

Region EURO

Own phase name 1



Up to ten phase names can be freely speciﬁed for

one's own use. Each of these can be up to 7 charac-

ters long. The characters of the name are assembled

by selecting them from a list. In addition to the stand-

ard names, these additional names will then also be

available in all model memory locations.

If possible, new phase name entries should begin

with the "Own phase name 1" line.

Change to the character table with a brief tap on the

centre SET key of the right touch pad:

!"#$%&’()

Own phase name

@ACDEFGHIJKLMNOPQRSTUVWXYZ[¥]^_

?+,–./0123456789:;

¢ÇüéâäàåçêëèïîìÄÅÉæÆôöòûùÖÜ

`abcdefghijklmnopqrstuvwxyz{|}~

Now the desired characters can be selected with the

selection keys of the left touch pad. With a brief tap

on the  selection key of the right touch pad or its

centre SET key, move to the next position in which a

character can be selected. A simultaneous tap on the

 or  keys of the right touch pad (CLEAR) will

place a space character at the current position.

Positioning to any character position within the entry

ﬁeld can be done with the  keys of the right touch

pad.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Graupner MC 32 HOTT Manual

Product: