467111
279
Zoom out
Zoom in
Previous page
1/345
Next page
279
Program description - Basic settings
Pre-set DSC Output PPM10
SEL
Top LCD contrast 0
Bottom LCD contrast 0
GENERAL BASIC SETTINGS
Pre-set Pitch min. rear
Now display contrast can be adjusted in the value
eld displayed in inverse video within a range of ±20
by using the selection keys of the right touch pad.
Pre-set DSC Output PPM10
SEL
Top LCD contrast 0
Bottom LCD contrast -15
GENERAL BASIC SETTINGS
Pre-set Pitch min. rear
Pre-set DSC Output PPM10
SEL
Top LCD contrast 0
Bottom LCD contrast +15
GENERAL BASIC SETTINGS
Pre-set Pitch min. rear
Simultaneously tapping the  or  selection keys
of the right touch pad (CLEAR) will reset the inverse
video fi eld back to "0".
Display light
This line determines how long the transmitter dis-
play's backlight illumination is to remain on after
switching the transmitter on or after the last activation
of a transmitter operating element.
Available options are “unlim(ited)”, “30 s”, “60 s”,
“120 s” and “off”.
A simultaneous tap on the  or  selection keys
of the right touch pad (CLEAR) will reset the inverse
video fi eld to "unlimited".
Power on/off beep
A power on/off beep for the transmitter can be
switched on ("yes") and off ("no") in this line.
A simultaneous tap on the  or  selection keys
of the right touch pad (CLEAR) will switch this option
shown in inverse video back to "yes".
Battery type
SEL
Bottom LCD contrast 0
Battery type Li-Io
Display light unlim.
Power-on/off beep yes
GENERAL BASIC SETTINGS
This line specifi es whether transmitter power is pro-
vided by a four-cell NiMH battery or a single-cell LiPo
battery. As a consequence of this setting, the next
line will offer a suitable voltage range for the "Battery
warning" threshold.
A simultaneous tap on the  or  selection keys
of the right touch pad (CLEAR) will switch this option
shown in inverse video back to "Lith.".
Battery warning threshold
SEL
Battery type Li-Io
Display light unlim.
Power-on/off beep yes
GENERAL BASIC SETTINGS
Battery warning 3.60V
You can arbitrarily specify the warning threshold for
the display …
Batt. must
be re-
charged!!
contingent on the battery type selection in the
line above in increments of 0.01 volt between 4.50
and 5.50 V (NimH battery) or 3.40 and 4.20 V (LiIo/
LiPo battery). Make sure that you do not enter a value
which is too low, so that you still have suffi cient time
to safely land your model in the event of a battery
warning.
A simultaneous tap on the  or  selection keys
of the right touch pad (CLEAR) will switch the fi eld
shown in inverse video back to its factory setting,
4.70 V (NiMh) or 3.60 V (Lith.).
Power-on warning
SEL
Battery type Li-Io
Power-on/off beep yes
GENERAL BASIC SETTINGS
Battery warning 3.60V
Stick warning unlim
In this line you can determine how long the transmit-
ter should wait after the last actuation of an operating
element until the activation of an optical and acoustic
power-on warning before the transmitter switches off
automatically one minute later.
The values "unlim(ited)", "30 s" and 1, 5, 10, 20, 30
and 60 minutes are optional selections.
A simultaneous tap on the  or  selection keys
of the right touch pad (CLEAR) will reset the inverse
video fi eld to "unlimited".
279


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info