467111
265
Zoom out
Zoom in
Previous page
1/345
Next page
265
Program description - Multichannel
Programming
Use the selection keys on the left or right touch pad
to scroll to the menu option »Multichannel« menu
option in the multi-function menu:
MIX active/phase MIX-only channel
Dual mixer Fail-safe adjust
Teacher / pupil Tx. output swap
Profi trim Trim memory
Telemetry Channel sequence
Multichannel Ring limiter
MIX-only channel Dual mixer
Swashplate mixer Fail-safe adjust
Teacher / pupil Tx. output swap
Profi trim Trim memory
Telemetry Channel sequence
Multichannel Ring limiter
… then open this menu option with a brief tap on the
centre SET key of the right touch pad.
Here, in the second column from the left, each of the
two multi-channel functions can be activated ("ACT")
or deactivated ("INACT") as desired and in the third
column the given function can be assigned to one of
the transmitter channels, C5 through C8, in a list.
MULTICHANNEL
MULTIC1
MULTIC2
INACT
INACT
C5
C6
SET SEL
MULTIC 4CH
MULTIC 4CH
SEL
Note:
When a changeover is made to the »Servo
display« or if »Servo adjustment« is
used to select the "-travel+" or "-lim +"
columns for these previously set channels, their
respective cells will ash to indicate that these
channels have been activated in the
»Multichannel« menu. The preset values of 100 %
or 150 % should not be changed.
Prior to channel selection, please observe the
following notices:
1. Switch to the "SETTINGS/DISPLAYS" line of the
»Telemetry« menu and tap on the centre SET key
of the right touch pad:
on the "RX SERVO" page, select the "20 ms"
setting in the last line "PERIOD", see page 248.
On the "RX SERVO TEST" display page, select
the "SAME" option for the last line "CH OUT
TYPE", see page 254.
2. The control channel used may not be used as an
input nor as an output channel for any mixer! For
example, if C5 is selected, be sure that the "Aile/
flaps" line of the »Model type« menu (page 105)
is preset to "1AIL" or that the "Swashplate type"
line of the »Helicopter type« menu (page 112) is
preset to "1 servo".
3. The channel settings intended for NAUTIC control
channel purposes in the »Control adjust« (page
108 ... 122) and »Servo adjustment« (page
112) menus are to be left as they are or reset
back to their original settings. Do not assign any
transmitter control or switch to the respective input
either. Also be sure that the servo's direction of
rotation is not reversed. Leave the servo middle at
0 %.
MULTICHANNEL
MULTIC1
MULTIC2
ACT
ACT
C5
C6
SET SEL
MULTIC 4CH
MULTIC 4CH
SEL
In the next column to the right, make a separate
channel count specification for each of the two multi-
channels; "MULTIC 4C." for the NAUTIC-Multi-Prop
mini decoder, No. 4142.N or "MULTIC 8C." for the
NAUTIC-Expert switching module, No. 4159.
MULTICHANNEL
MULTIC1
MULTIC2
ACT
ACT
C5
C6
SET SEL
MULTIC 4CH
SEL
MULTIC 8CH
Afterward, use the right arrow symbol at the bottom
line's right end to switch over to the second page of
settings for the »Multichannel« menu:
MULTICH 2
–––
SEL Offset
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
fr
fr
fr
fr
fr
fr
fr
fr
–––
–––
–––
–––
–––
–––
–––
+100%
+100%
+100%
+100%
+100%
+100%
+100%
+100%
0%
0%
0%
0%
+100%
+100%
+100%
+100%
+100%
+100%
+100%
+100%
0%
0%
0%
0%
– travel +
This menu page is now used for making individual
settings for "MULTICH 1" and "MULTICH 2".
265


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info