467111
86
Zoom out
Zoom in
Previous page
1/345
Next page
86 Program description - Base setup models | Winged models
are all the HoTT-specific displays in the base display;
“PPM” is also superimposed instead of “HoTT”:
#01 0:00h
Stop watch
Flight time
K78
0:00.0
4.1V
0:00.0
RX VOLT:0.0v
00
0
0
00:00h
M
V
PPM
Graubele
H-J Sandbrunner
SP mode (Digital signal at DSC sock-
et)
If you need for external RF module from another
manufacturer, or however, instead of the analog PPM
signal a special digital signal, then connect it to the
DATA jack and select the line “module” to “SP Mode”:
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
Also include here the choice by pressing the central
SET key of the right or the centre ESC key of the left
touch pad.
Parallel to this choice are also the options described
below “Receiver output” and “Range Test” and hidden
all HoTT-specific displays in the basic display and
instead of “HoTT”, “SP” is displayed:
#01 0:00h
Stop watch
Flight time
K78
0:00.0
4.1V
0:00.0
RX VOLT:0.0v
00
0
0
00:00h
M
V
SP
Graubele
H-J Sandbrunner
“Mode” column
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
In this column you select the transmission mode of
the external RF module:
Mode “1”: 2-channel hopping
Mode “2”: x-channel hopping
“BIND” column
Model name
Stick mode 1
BASIC SETTING,MODEL
Info
Module
Graubele
1234g/111111
SEL
SP mode
MOD BD
1bind
The “BIND” column in the right-hand column can be
used to initiate the “Bind” process of the non-Graup-
ner system – the transmitter’s RF section must be
switched off when the transmitter is rst switched
on.
Important notes:
The output voltage of the DATA
socket is around 5 V, and must be
reduced to the power supply
voltage generally required by external
digital RF modules (3 to max. 3.3 V). This
is accomplished using the circuit which
is shown here in diagrammatic form:
GND
Vcc IN = 5 V
DATA +
DATA S 125000 baud signal
Vcc
GND
DATA -
22µF/6.3 V 22µF/6.3 V
Vcc OUT = 3 ... 3.3 V
Low Drop
Voltage
Regulator SP.-MODULE
with
digital input signal
Servo travels must be limited to max.
128 %.
SP channels
Note:
This menu line is suppressed in the “Module”
line if you select “HoTT” or “EXT.”.
If necessary, use the Select buttons  of the left or
right-hand four-way button to move to the “SP chan-
nels” line, then briefly press the central SET button of
the right-hand four-way button to activate the Value
window:
Stick mode 1
BASIC SETTING,MODEL
Info
Module
1234g/111111
SEL
bind
1
SP module
SP channels 6
86


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info