467111
70
Zoom out
Zoom in
Previous page
1/345
Next page
70 Program description - Loading a new memory location
Anyone who has worked through to this part of the
manual has certainly already tried out a bit of pro-
gramming. Nevertheless a detailed description of
every menu should not be left out.
This section begins with the loading of a "free" mem-
ory location, a procedure which would be performed if
a new model was being "programmed".
#01 0:00h
Stop watch
Flight tim
K78
0:00.0
4.1V
0:00.0
RX VOLT:0.0v
00
0
0
00:00h
M
V
From the basic display, a jump to the "Multi-function
list" is made with a tap on the centre SET key of the
right touch pad. (The centre ESC key of the left touch
pad will cause a jump back to the basic display.) By
default, when the multi-function list is called for the
first time after switching on the transmitter, the »Mod-
el select« menu option will be active and displayed in
inverse video. Otherwise use the  or  selec-
tion keys of the left or right touch pad to select the
»Model select« menu option, whereby the upper of
the two following figures shows a selection list for a
fixed-wing model and the lower shows the selection
list for a helicopter model.
Detail program description
Loading a new memory location
Servo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 curve Switch display
Model select Copy / Erase
Suppress codes Suppress models
Base setup model Model type
Servo adjustment Stick mode
Control adjust Dual Rate / Expo
Channel 1 curve Switch display
Model select Copy / Erase
Suppress codes Suppress models
Base setup model Helicopter type
Tap briefly on the centre SET key of the right touch
pad to open this menu option:
03
04
05
 free
02
01
06
E16
 free
 free
 free
 free
00:12h
In the transmitter's delivered state, the first model
memory is initialized to the "xed-wing model" type
and the receiver in the delivery is "bound" to this
model. The time display located near the line's middle
indicates the overall operating time of the respective
model memory.
In the above example E16 in dark font on a light
background.
On this view it can be seen that the receiver is “spe-
cific memory” associated with the default option set
with the model memory 1 so that it only responds to
the control signals that a model memory of his sta-
tion. For details, see page 83 or 93.
In a “transmitter-specific” bound receiver the receiver
identifier is displayed in bright characters on a dark
background ...
03
04
05
 free
02
01
06
E16
 free
 free
 free
 free
00:12h
The remaining memory locations, marked with
"free", are still unoccupied and therefore
also "non-bound". If you wish to program a fixed-wing
model then, after leaving the »Model select« menu
with a tap on the centre ESC key of the left touch pad,
programming of the model can begin right away … or
now use the or keys of the left or right touch pad
to select one of the free memory locations …
03
04
05
01
06
R16
 free
 free
 free
 free
00:12h
 free
02
… and then tap on the centre SET key of the right
touch pad to confirm the choice.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info