467111
23
Zoom out
Zoom in
Previous page
1/345
Next page
23
Transmitter description - Front side
Transmitter description
Front side
Antenna
removable antenna, with kink and twist joint
Option locations
for retrofi tting the transmitter with switches and knob
modules 8 switches included as standard equipment
Function modules
three sliders, "Sl1", "Sl2", "Sl3"
Digital trim
For the fi ne-tuning of servo positions
(travel neutralization). When turned, each click
produces an increment of adjustment (position
indicator in display). A press on the trim wheel
will reset the trim adjustment.
LC Display (more details available on page 30.)
Contrast adjustment: a simultaneous tap on
() + "SET" of the right touch pad = change
to "secret options"
Warning indicators:
for underrun of preset battery voltage threshold
for fault function of the teacher/pupil system
C1 stick too far toward full throttle when transmit-
ter is switched on
ON/OFF switch (ON/OFF with LED display)
Note:
Always switch on the transmitter then the receiver.
When switching off,  rst switch off the receiver then
the transmitter.
Stick
Two sticks for a total of four independent control
functions. The length of the sticks can be
adjusted. The correlation of control functions 1
… 4 can be set on a model type basis by way
of the »Basic settings, model« menu, e. g.
throttle left or right. The throttle stick can be
converted from neutralizing to non-neutralizing,
see page 21.
v
LC Display (more details available on page 30.)
Telemetry indicators: receiver parameters,
standard. Other indicators dependent on the
data from the optional sensors connected.
LED indicators
BATTERY: illuminates when voltage is suffi cient
RF: illuminates during RF radiation
WARNING: blinks, for example, when "Throttle too
high", "no pupil signal", "Transmitter
battery voltage too low", …
Function module
rotary control: left-side "Lv2",
right-side "Lv1"
Function modules
Drum roller control: left "Tv5", top "Tv3", right "Tv1"
Function modules
Knob control (depressible): left "Tv4", right "Tv2"
Loudspeaker
left touch pad:
+
ESC = select/confi rm
ESC touched for about 1 s: Changeover between
telemetry menu and basic display
= scroll in one of the four directions with every
tap (, , , )
simultaneous horizontal tap ()
= changeover between basic display and servo
display
simultaneous vertical tap of the left
() keys + "SET" of the right touch
pad = changeover to the "secret
options", see page 35.
SET = select/confi rm
= scroll or change value with every touch of one
of the four direction
symbols (, , , )
Circle with the fi nger around the circumference
= scroll/change values. Alternative values
selection with the left touch pad (, , , )
simultaneous tap on 
or  = CLEAR
right touch pad:
or
LC Display (more details available on page 30.)
LC Display (more details available on page 30.)
Digital trim
Function module
LED indicators
LED indicators
BATTERY: illuminates when voltage is suffi cient
RF: illuminates during RF radiation
WARNING: blinks, for example, when "Throttle too
left touch pad:
Function modules
high", "no pupil signal", "Transmitter
battery voltage too low", …
… 4 can be set on a model type basis by way
of the »
Basic settings, model
« menu, e. g.
throttle left or right.
The throttle stick can be
converted from neutralizing to non-neutralizing,
see page 21.
standard. Other indicators dependent on the
data from the optional sensors connected.
Loudspeaker
Loudspeaker
Function modules
Drum roller control: left "Tv5", top "Tv3", right "Tv1"
Drum roller control: left "Tv5", top "Tv3", right "Tv1"
Knob control (depressible): left "Tv4", right "Tv2"
Knob control (depressible): left "Tv4", right "Tv2"
Function modules
Knob control (depressible): left "Tv4", right "Tv2"
Knob control (depressible): left "Tv4", right "Tv2"
Knob control (depressible): left "Tv4", right "Tv2"
Knob control (depressible): left "Tv4", right "Tv2"
Connector sockets
on the face side, protected by a cover, see beginning
page 24
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC 32 HOTT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC 32 HOTT in the language / languages: English as an attachment in your email.

The manual is 46,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner MC 32 HOTT

Graupner MC 32 HOTT User Manual - German - 320 pages

Graupner MC 32 HOTT User Manual - Dutch - 328 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info