747993
53
Zoom out
Zoom in
Previous page
1/80
Next page
53 / 80
33028_mc_28_Teil2_jh
Free mixers
In this menu you can find free programmable linear and curve mix-
ers.
In each model memory there are eight available linear mixers with
the designation M1 to M8 and four curve mixers with the designa-
tion C9 to C12.
Mixer programming step by step:
1. Select the desired mixer
2. Tap the SER button, the field will be highlighted
3. Set the mixer input "From" though the selection keys
4. Tap the SET button, then change to the column "To" using the
selection keys
5. Tap the SER button, the field will be highlighted
6. Select the mixer output "To" with the selection keys.
7. Set the mixer type in the second "Type" column
Tr = Trim
P = Phase (only for model type "Heli")
-> Series switch
8. Assign a switch or a control switch in the column " "
9. In the column " " define the mixer component and the mixer
offset in the following display page. The display page will be shown
only if the switch is assigned and actuated.
Possible settings in the columns
"Type"
Tr : This function can be selected only in the channels one to four.
here you can select if the mixer input trim also has to act on the
mixer output.
Tr -> : The trim acts also to the series switch
-> : Series switch of the mixers, example:
Without series switch With series switch
Phase timers
Wing mixers
MIX-only channel
Dual mixer
Free mixers
MIX active/phase
Ty p fr zu
M8
C9
C10
?? ??
?? ??
C11
C12
?? ??
?? ??
?? ??
L.Mix1
0% 0%
0%
Offset
ASY
SYM
1
Mix input
3
6 6
7
Servo 4,8 V
C 577
Best.-Nr. 4101
Servo 4,8 V
C 577
Best.-Nr. 4101
7
8
Servo 4,8 V
C 577
Best.-Nr. 4101
MIX 1
MIX 2
6 6
7
Servo 4,8 V
C 577
Best.-Nr. 4101
Servo 4,8 V
C 577
Best.-Nr. 4101
7
8
Servo 4,8 V
C 577
Best.-Nr. 4101
MIX 1
MIX 2
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info