747993
54
Zoom out
Zoom in
Previous page
1/80
Next page
54 / 80 33028_mc_28_Teil2_jh
In a series switch of mixers, the mixed signal of the channel from the
upstream mixer is used as the input not the direct control signal of
the channel.
P : This option includes the trim values from the "Phase trim" menu
of the input channel as a function of the phase.
Notice
In the case of series switch, the mixing travel of the individual mixers
add together with simultaneous stick movement. As a result, the
servo or the servos may mechanically collide. To prevent the mechan-
ical collision, the "servo travel" must be reduced, a corresponding
"travel limit" in the "Servo adjustment" menu set, and / or the mix-
ing value should be reduced.
"From"
Channels 1 to 16, in case of model type "Airplane" the channels 1 to
4 are marked Thr (throttle), AILE (ailerons), ELE (elevator), RUDD
(rudder)
„S“ = Switch channel - the mixer input is assigned to a constant input
signal with the switch. The value of the signal is set in the display
page of the column " ".
"To"
In the input field of this column input the target of the mixer: the
mixer output to one of the control channels.
In this column assign a switch or control switch. This switch can acti-
vate or deactivate the mixer.
Setting the linear mixers M1 … M8
Open the display page in the column " ". Move the control of the
mixer input to move a vertical line in the graphic to the right of the
display. This line shows the position of the control. In the line
under "Mix input" set the travel of the mixer output. If "SYM" is
selected in the bottom line, the two values change symmetrically
(simultaneously). If you select "ASY" (asymmetric), you can change
the values separately. Each time the values are changed, the posi-
tion of the horizontal line changes. This line shows the travel of the
mixer output.
L.Mix1
0% 0%
0%
Offset
ASY
SYM
1
Mix input
3
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner MC-28 4D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner MC-28 4D in the language / languages: English as an attachment in your email.

The manual is 17,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info