747933
41
Zoom out
Zoom in
Previous page
1/51
Next page
41 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
The control direcon of the tail rotor can now be checked. If this is
wrong, you have to change the direcon of channel 4 in the "servo
seng" menu of the transmier.
Adjustment range of the neutral impulse: 1,5 ms, 760 μs or 960 µs.
Tail frequency
The tail frequency can be set in a range between 50 and 333 Hz.
Adjustment range: 50, 52, 55, 58, 62, 66, 71, 76, 83, 90, 100, 111,
125, 142, 166, 200, 250 and 333 Hz.
Aenon
Analog servos may only be operated at 50 Hz, otherwise the ser-
vos will be destroyed. Digital servos can be operated at a higher
frequency. This allows the model to be controlled more quickly.
The operaon of higher frequency servos is at your own risk.
For Graupner servos of type "HBS" we recommend a seng of
333 Hz.
Tail mid
As soon as the value field "Value tail mid" is acvated (field inverted),
the tail servo moves to the neutral posion. The tail servo arm should
be at a 90-degree angle to the tail linkage pushrod.
The fine trim is then adjusted based on the "Tail mid" opon. When
the servo is set to neutral, the tail rotor should have a pitch angle of
approx. 2 ... 3° against the torque. Check whether the control direc-
on is correct. If this is wron
g, you have to change the direcon of
channel 4 in the "servo seng" menu of the transmier.
Adjustment range: -100 … +100
Tail limit A/B
The display "A" or "B" and its corresponding value changes automat-
ically according to the transmier-side posion of the tail rotor con-
trol sck. The two endpoints are set separately.
Select the direcon with the tail rotor control sck and bring it to the
stop. The display shows the respecve value for A or B.
Aerodynamically meaningful values should be set, because if the
rashes are too great, stalling of the tail rotor blades can occur. It is
also important to ensure that the servo and / or the tail rotor mech-
anism does not overrun mechanically, but the possible travel can be
fully ulized.
Adjustment range: +50 … +200
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info