747933
32
Zoom out
Zoom in
Previous page
1/51
Next page
32 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Display "Swashplate seng"
SWP sensivity
Swp setting
Direct stick R +115
Direct stick N +115
SWP sensitiv.(50)C10
Swp rate +85
Swp expo +15
SWP setting
Direct stick R +115
Direct stick N +115
Swp sensitiv. 65
Swp rate +85
Swp expo +15
The "SWP sensivity" opon allows you to adjust the sensivity
either by specifying xed values or alternavely by assigning a con-
trol channel (C5 ... C16) that controls the value from the transmier
with a proporonal control. To do this, a rotary or slider control is
assigned to one of the control channels 5 ... 16 and the remaining
sengs are le at the default values. In the value field of the "SWP
sensivity" line, the corresponding channel is then merely to be
selected instead of a fixed value. The current control posion is dis-
played in the bracket in front, for example "(50) C10", see lower fig-
ure on the le.
Via corresponding sengs in the transmier, a flight-phase-depen-
dent sensivity control is also possible, for example via the menu
"Control sengs" or the opon "Gyro" in the Helimix menu.
The heli oscillates around the
rotor sha :
The sensivity should then be reduced unl vibraon-free flies
are possible in all flight situaons.
The helicopter does not hover in a stable manner and it is sus-
cepble to wind.
The sensivity should then be increase unl vibraon-free flies
are possible in all flight situaons.
Adjustment range: 1 … 100, Min or C5 … C16
Note
If a control channel is selected in the "SWP sensivity" line, but no
control is assigned to it on the transmier side, the value in brack-
ets corresponds to the current neutral posion of this control chan-
nel.
Swp rate
Here is set the max. possible yaw rate for roll and pitch.
Adjustment range: +50 … +120
Expo Swp
Servo travel
Servo travel
Servo travel
Control travel
Control travel
Control travel
Expo = +100%
Expo = +50%
Expo = –100%
In this line an exponenal curve for the control of roll and nick can
be set.
With a seng of "0" a linear control of the swashplate takes place,
with high percentage values a progressive control is achieved,
whereby the helicopter does not react so sensive around the mid-
dle of the sck.
Adjustment range: 0 … +50
Note
Expo sengs should always be made either in the receiver or in the
transmier, otherwise the two Expo sengs overlap.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info