747933
31
Zoom out
Zoom in
Previous page
1/51
Next page
31 / 52
S1019_S1034_S1035_33579_33583_FW2_DE_V1.0sh
Transmier presengs
Select free / deleted model memory and inialize with model
type "helicopter".
Set "Pitch front/back" according to your personal preferences
and do not change it anymore.
Set all trims to "0" or leave them, never change them in flight. If
possible, the trims should be deacvated in the transmier for
safety's sake, for example by seng the trim step to "0".
As a swashplate type "1 Servo" is to be acvated or le. (The
swash plate mixers take place in the receiver).
All servo travel and direcon sengs will remain at their default
values for the moment. So on 100% servo travel and "normal"
direcon of rotaon. Likewise, no further programming, in par-
cular in the heli-specific area, may be undertaken.
Bind the receiver to the transmier.
Inialize the receiver
Each me the model is powered up, the gyros are immediately acve
but not
yet calibrated. Since calibraon is only performed on a quiet
receiver, the model should be kept steady when switched on. As
soon as the swashplate moves briefly three mes in the idle posion
aer approx. 3 seconds, the inializaon has been successfully com-
pleted and the calibraon is completed.
This process must be awaited each me the receiver system is
switched on before the model can be started!
Basic sengs
Procedure
1. Aer successful preparaon of the transmier and the helicop-
ter, the telemetry menu of the transmier must be called up
according to the respecve transmier instrucons.
2. In the receiver menu, the model type is set to "Heli", see illustra-
on on the le.
3. Since the sequence of the subsequent display descripons is
based on the order in the receiver, the rst step in the
inial
setup of a helicopter is to change to the menu "Basic sengs
control". (The menus between them are only relevant aer-
wards!)
Note
The following display illustraons always show the respecve
default values.
RECEIVER 2.03
ALARM VOLT: 3.8V
ALARM TEMP: 70°C
Max. altitude: 0m
LANGUAGE: English
Ant1 100% Ant2 100%
Period: 20ms
Model type: Heli
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-24 PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-24 PRO in the language / languages: English as an attachment in your email.

The manual is 8,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-24 PRO

Graupner GR-24 PRO User Manual - German - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info