747935
14
Zoom out
Zoom in
Previous page
1/24
Next page
14 - 24
GR-18_3D_jh_V1
Suggested throttle course setting
The motors arm at -95%, for this you need to limit the servo
travel to -94...100%, so that the motors cannot stop during
the flight.
WARNING
Protection function against undesired start of the motors.
Risk of injury by propellers!
Normal mode:
For safety reasons the motors start after the switching on
through the motor stop switch only if in Attitude and in Rate
mode the throttle stick is in the lower position. Move the
throttle stick slowly in the lower position, then it is possible to
control the speed normally.
Only in Acro 3D mode:
In Rate mode the motors start after the switch on through the
motor stop switch only by lower throttle. Only after that the
throttle stick has passed the middle position the motors speed
can be controlled regularly.
Move the throttle stick slowly over the middle so that the
motors do not start uncontrolled fast and the copter flies away
without control.
Install the propellers only as very last operation before flight.
Make practice with this function without propellers before you
install them on the copter..
This safety function will be automatically set off if in the trans-
mitter you program a time delay on the gas channel. Be sure
that in the flight phase switching or in the throttle stick menu
no delay is set.
!
linear to max.
Min. Thr.
T
hrottle course
A
ttitude mode
with limit
95%
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-18 - S1019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-18 - S1019 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-18 - S1019

Graupner GR-18 - S1019 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info