747935

Graupner GR-18 - S1019 Manual

9
Zoom out
Zoom in
Previous page
1/24
Next page
9- 24
GR-18_3D_jh_V1
batteries must be of the same nominal voltage and capacity.
Never connect different battery types or batteries with strongly
different charges since this can cause an effect similar to a short
circuit. In such cases for safety reasons, insert voltage stabiliz-
ing elements such as PRX-5A (No. 4136) receiver power sup-
plies between the batteries and receiver.
Telemetry or channel (T/9) socket
The optional telemetry sensors are connected to the socket
marked “T” (T/9)- Telemetry. In addition, the update is performed
on this socket. The socket can even be used as optional chan-
nel 9. (see following section)
Receiver setup menu
The receiver setup menu appears in the “Telemetry“ menu under
SETTINGS / DISPLAYS or if you are using a SMART-BOX under
SETTING & DATAVIEW. How to access this menu is described
in the operating instructions supplied with your transmitter or
Smart-Box.
ALARM VOLT (receiver low voltage warning)
If the receiver voltage falls below the set value, a low-voltage
warning is generated by the transmitter's RF module in the form
of a "general alarm tone" (regular beeping at a rate of approx.
one beep per second) or the "receiver voltage" speech output
message.
(ALARM TEMP): Temperature warning
If the receiver temperature exceeds the set temperatu
re, a warn-
ing is generated by the transmitter’s RF module in the form of a
"general alarm tone" (regular beeping at a rate of approx. one
beep per second) or the "receiver temperature" speech output
message.
(Max. altitude) Maximum altitude (not by S1019 GR-18L)
This is where you can specify a maximum altitude. When the
model reaches this altitude, an alarm is triggered either by the
transmitter's RF module in the form of a "general alarm tone"
(regular beeping at a rate of approx. one beep per second) or
the "altitude" speech output message. Note: When the receiver
is switched on, the model's current altitude is set to 0; the dis-
played altitude is therefore the altitude relative to the launch
point. For Racecopter we suggest to set an alarm at 25 meters,
otherwise it should be set maximum at 100 meters.
  
  
  °
  
 
   
   
 
   
Inform yourself before flying
your model on which maximum
altitude you can fly in the
uncontrolled airspace over the
starting position and do not
exceed it.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-18 - S1019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-18 - S1019 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-18 - S1019

Graupner GR-18 - S1019 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info