747935
10
Zoom out
Zoom in
Previous page
1/24
Next page
10 - 24
GR-18_3D_jh_V1
Cycle time (PERIOD)
If your system is used exclusively with digital servos, you can set
a cycle time (frame rate) of 10 ms. If your system includes some
or uses exclusively analogue servos, you should always select
20 ms, as many analogue servos cannot process the higher
frame rate and may respond by "jittering" or "growling". Not
important for connected speed controllers.
HoTT sum signal (SUMD)
If you activate the digital sum signal at channel 6, a sum signal
containing 8 channels is present at this socket, instead of a
servo signal. The HoTT receiver configured as SUMD constantly
generates a digital sum signal from 8 control signals from the
transmitter and makes this signal available at the appropriate
servo socket, which is receiver-specific. At the time this manual
was revised, this type of signal was being used by several of the
latest electronic applications of flybarless systems, power sup-
plies, etc.
(Sensor at CH9):Telemetry sensor
Telemetry sensor (sensor at CH9): This socket allows you to use
either for telemetry or for an extra channel (9). (Attention! Both
together is not possible!) Switching is done in this menu item. If
you select “Yes”, the socket is connected to the connection of
a sensor. If you
select “No” a jack is connected to the control
channel 9.
Ant. 1 - Ant. 2
This indicator shows strength of the signal received (as a per-
centage) from the antennas of the receiver. The display is used
to find the correct position of the antennas during the installa-
tion.
Transmitter presettings
In the transmitter it must be selected a free model memory, the
model type must be “surface model“ and the channel 1 direction
must be set so that in “motor off“ position the power indicator
must show -100%.
The flight mode must be set on channel 5. For this program a
2-way switch (e.g. switch 3) in the transmitter control menu on
Channel 5 as follows:
Attitude mode: Channel 5 = -100% to +50%. The stick move-
ment determinates the Copter reaction on Roll and Nick. It
allows a maximal angle of about 50° at 100% of stick move-
ment. Mode suggested for beginners. The stick movements
acts directly proportionally to Roll and Nick.
Rate mode: Channel 5 = more than +50%. The stick movement
determinates the rate without angle limit. Aerobatic mode that
allows rolls and loopings.
We suggest to set the fail-safe on channel 5 and channel 1 at
-100% , so that in fail safe it is active the attitude mode.
Setting necessary when servos
are installed for additional
functions
Step 1
Setting of the flight-mode -
attitude or rate mode
E5
TRV +
+100%
E6
+100%
+100%
+88%
+100%
3
Do not forget to set the failsafe up!
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-18 - S1019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-18 - S1019 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-18 - S1019

Graupner GR-18 - S1019 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info