747935
7
Zoom out
Zoom in
Previous page
1/24
Next page
7- 24
GR-18_3D_jh_V1
Due to safety and licensing reasons (CE), any unauthorized
reconstruction and/or modification of the product is prohib-
ited.
Only use the components and spare parts that we recom-
mend. Always use matching, original Graupner plug-in con-
nections of the same design and material.
Make sure that all of the plug-in connections are tight. When
disconnecting the plug-in connections, do not pull the
cables.
Protect the receiver from dust, dirt, moisture and other for-
eign parts. It must be protected from vibration as well as
excessive heat or cold. The models may only be operated
remotely in normal outside temperatures such as from -10°C
to +55°C.
Only operate all your components using the current software
version.
If you have questions which cannot be answered by the
operating manual, please contact us (contact information
see page 3) or another expert in the field.
WARNING
Also while programming, make sure that a connected elec-
tric motor cannot accidentally start. Injury risk by the turning
propellers!
Avoid shock and pressure. Check the receiver regularly for
damages to the housings and cables, specially after model
crashes. Damaged or wet receiver,
even if re-dried, should
no longer be used!
WARNING
Risk of injury! For safety reasons the motors start only if in Atti-
tude mode the throttle stick is in the quarter lowest part. Then it
is possible to control the speed normally. In Rate mode the
motors start after the swhitch on through the motor stop switch
only by idle throttle. Only after that the throttle stick has passed
the midle position the motors speed can be controlled regularly.
Move the throttle stick slowly over the midle so that the motors
do not start uncontrolled fast and the copter flies away without
control. Install the propellers only as very last operation before
flight. Make practice with this function without propellers before
you install them on the copter.
!
!
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graupner GR-18 - S1019 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graupner GR-18 - S1019 in the language / languages: English as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Graupner GR-18 - S1019

Graupner GR-18 - S1019 User Manual - German - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info