506307
8
Zoom out
Zoom in
Previous page
1/14
Next page
Abnahme der Messers
Von Zeit zu Zeit sollte die Maschine auch hinter dem Messer gereinigt werden. Dazu entfernen Sie den Schlitten
(4) und drücken mit einem Finger auf den Messerverschluss (8). Dieser klappt leicht auf und kann nun ganz geöff-
net werden (Abb. 10). Drehen Sie jetzt den Verschluss im Uhrzeigersinn bis zum Anschlag. Danach das Messer vor-
sichtig abnehmen.
Vorsicht scharfes Messer!!!
Reinigen Sie die Innenseite des Messers mit einem feuchten Tuch. Das Einsetzen des Messers erfolgt in umge-
kehrter Reihenfolge.
Removing the blade
The device should occasionally be cleanded behind the blade. To do this, remove the carriage (4) and press the
blade lock (8) with one finger. It is automatically released and can be opended completely (Fig. 10). Now than
the lock clockwise as far as it will go. Then carefully remove the blade.
Caution: sharp blade!!!
Clean the interior of the blade with a damp cloth. Install the blade in the reverse order.
Dépose de la lame
De temps en temps, il est nécessaire de nettoyer la machine derrière la lame. Pour ce faire, déposez le chariot (4)
et appuyez avec le doigt sur la fixation de la lame (8). La fixation émet un léger claquement, et vous pouvez alors
d’ouvrir entièrement (Fig. 10). Tournez ensuite la fixation dans le sens des aiguilles d’une montre jusqu’à la butée.
Puis enlevez la lame avec précaution.
Attention, lame aiguisée!!!
Nettoyer la face interne de la lame avec un torchon humide. La pose de la lame se déroule dans l’ordre inverse.
Smontaggio della lama
Di tanto in tanto è necessario pulire la macchina anche dietro alla lama. Rimuovere quindi il carrello (4) e preme-
re con un dito sul blocco della lama (8). Quest’ultimo si schiude con facilità e può poi essere aperto completa-
mente (Fig. 10). Ruotare ora il blocco in senso orario fino all’arresto. Rimuovere quindi la lama con cautela.
Attenzione: lama affilata!!!
Pulire la parte interna della lama con un panno umido. Il montaggio della lama avviene in sequenza inversa.
Het mes verwijderen
Af en toe moet de machine achter het mes schoongemaakt worden. Hiervoor moet u de slede (4) verwijderen en
met een vinger op de mesafsluiting (8) drukken. Die klapt gemakkelijk los en kan nu helemaal geopend worden
(afb. 10). Draai nu de afsluiting in wijzerzin tot aan de aanslag. Neem daarna het mes voorzichtig weg.
Opgelet scherp mes!!!
Maak de binnenkant van het mes met een vochtige doek schoon. het opnieuw monteren van het mes gebeurt in
de omgekeerde volgerde.
Afmontering af kniven
Fra tid til anden bør makinen også rengøres bag ved kniven. For at gøre det skal De fjerne slæden (4) og trykke
med en finger på knivlåseanordningen (8). Den åbner lidt og kan nu åbnes helt (Fig. 10). Drej nu låseanordningen
med uret indtil stop. Tag derefter kniven forsigtig af.
Forsigtig: skarp kniv!!
Rengør indersiden af kniven med en fugtig klud. Kniven sættes i i omvendt rækkefølge.
GB
F
I
NL
DK
D
10
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Graef TENDENZA T10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Graef TENDENZA T10 in the language / languages: English, German, Dutch, Danish, French, Italian, Spanish as an attachment in your email.

The manual is 2,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info