571678

Gossen Metrawatt SECUTEST SIII Manual

16
Zoom out
Zoom in
Previous page
1/72
Next page
16 GMC-I Messtechnik GmbH
6 Abbreviations
AE Error condition: application part grounded
AP Apparent power (during function test)
B, BF, CF Classifications for application parts
DEFI Defibrillator
I Residual current, fault current (during function test)
I
max
Maximum residual current (during function test)
RC
wc
Residual current worst case
HE Error condition: housing grounded
I
CLIP
Current at clip-on meter
I-EHC
SCII
Equivalent device leakage current for devices with
additional safety class II components
I-EHL
A1/A2
Equivalent device leakage current with note A1/A2
(cross-reference within the standard)
I-EHL
FR
PE
Equivalent device leakage current for portable x-ray devices
+PE: with additional protective conductor
–PE: without additional protective conductor
I
EL
, I-EL Equivalent leakage current
I
EDL
, I-EDL
Equivalent device leakage current (current at protective conductor)
I
EPL
, I-EPL Equivalent patient leakage current
I
L
, I
HL
, I-HL Leakage current (differential, probe or contact current)
I
L(max)
(I
a
) (Maximum) load current (during function test)
I
LC
Device leakage current
I
PA
Patient auxiliary current
I
PE
Earth leakage current (current at protective conductor)
I
PL
Patient leakage current
I
PMAP
Mains to application part (patient leakage current measurement)
I
RC
, (I
Re
) Residual current (current at protective conductor during
automatic test sequence)
I
C,
I
HL
, I-HL Contact current (housing leakage current)
IT-system The IT system makes no direct contact between active
conductors and grounded parts: bodies within the elec-
trical system are grounded.
L Phase conductor connection of DUT
MedGV German medical device ordinance
MLV manufacturer’s limit value
MPG German medical product law
MSELV Medical safety extra-low voltage
N Neutral conductor connection of DUT
NC Normal condition
OE Operational earth
P Active power (during function test)
PA Functional earth (equipotential bonding)
PE Protective conductor connection of DUT
PF Power factor (during function test)
RResistance
R
INS
, R-INS Insulation resistance
R-INS AP-PE Insulation resistance: application part to PE
R-INS
INT. KARD.
Insulation resistance: intercardiac
(application in proximity to the heart)
R-INS NL-PE Insulation resistance: neutral/phase conductor to PE
R
PE
, R-PE Protective conductor resistance
R-PEmains Protective conductor resistance limit value for
+mains: device under test with mains cable
–mains: device under test without mains cable
(protective conductor resistance limit value for mains
cable only = 0.1 
SELV Safety extra-low voltage
SFC Single-fault condition
t On-time (during function test)
T, Temp Te mperatu re
U
AC/DC
AC/DC voltage
U
REF
Reference voltage: voltage to which leakage current is
related (as a rule nominal line voltage)
U
HV
, U-HV High-voltage
U
INS
, U-INS Test voltage for insulation measurement
U
LN
, U-LN Line voltage
U
MEAS
Voltage at which testing was executed.
Displayed for all leakage current measurements.
U
Probe
Probe voltage
W Electrical energy (during function test)
ZVEH General Association of German Electricians
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUTEST SIII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUTEST SIII in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info