571678

Gossen Metrawatt SECUTEST SIII Manual

14
Zoom out
Zoom in
Previous page
1/72
Next page
14 GMC-I Messtechnik GmbH
4.4 Configuring Device Parameters, Setting Date and Time
Device parameters and functions which are valid for all selector switch
positions can be activated or deactivated with the selector switch in the
Setup position (see chapter 8 on page 18).
4.5 Configuring Measurement and Sequence Parameters
Measurement and sequence parameters, as well as functions, can be
activated or deactivated in the setup menu (selector switch in the Auto
position) for the respective test regulation. Refer to chapter 15.3 on page
39 for the significance of the various parameters.
4.6 Setting Limit Values
Upon delivery, the limit values set forth (at the point in time of issue) in ap-
plicable national and international standards are stored to the test instru-
ment. Limit values for each of the respective standards can be queried
and changed if required with the setup menu (selector switch in the Auto
position), but changes can only be made which result in even stricter test-
ing than is required by the respective standard.
Newly entered limit values become effective immediately. However, these
are only stored to memory permanently after activating the store function
in the setup menu.
If the limit values set forth in the standards for certain safety classes need
to be restored despite individualized settings, the menu function all values
per standard in the limit values sub-menu must be selected and acknowl-
edged with the key.
If the limit values set forth in the standards are changed, the instrument’s
device software can be updated via the RS 232 interface.
4.7 Saving the Settings
All of the settings and changes which have been entered to the configure,
limit values (selector switch in the Auto position) and zero point (temperature
measurement) (selector switch in the Aux position) menus, as well as the se-
lected contrast setting are retained until the selector switch is turned, or
the test instrument is disconnected from mains power. If settings and
changes should be retained even after mains power has been interrupted,
they must be saved in the setup menu for the respective test regulation or
selector switch position.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUTEST SIII at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUTEST SIII in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info