590771

Gossen Metrawatt SECUSTAR FM Manual

99
Zoom out
Zoom in
Previous page
1/160
Next page
GMC-I Messtechnik GmbH 99
Automatic Test – Administration
Test Step Specification – Multiple Measurement
Several measuring points can be acquired from a single DUT with
these measurements.
Measurement is started as a continuous measurement. Three
buttons can be used during the measurement, namely “Accept”,
“End Test Step” and “Abort”. The current measured value is
accepted as the test result with the “Accept” button. However,
measurement continues so that an additional measured value can
be accepted by pressing the “Accept” button once again.
Measurement can be ended with the “End Test Step” button, after
which the next test is started. The sequence can be stopped with
the “Abort” button. The measured values for the individual mea-
suring points are listed in a special window, one after the other.
The results of the test step are determined on the basis of these
values and are always based on the worst of all measured values.
Test Step Specification – Visual Inspection
A visual inspection prompts the test person to visually assess the
device under test. One or a number of test questions can be
answered with “OK” or “Not OK”.
Short-form Operating Instructions
Entering a Visual Inspection
Ð Enter a new test step:
Ð Select visual inspection
General Index Card
Ð Designation: Enter a designation for identification/archiving
Class Visual inspection (pre-selection)
Ð Description: A comment can be entered if required
Visual Inspection Questions Index Card
Ð Select and edit new visual inspection / test instruction
Ð Select add further questions if required
Ð Select and edit new visual inspection question
Ð Change the order of the questions with the keys
if required
Ð Individual questions can be deleted with the symbol
… 99 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECUSTAR FM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info