Manual Gossen Metrawatt SECUSTAR FM (page 101 of 160) (English)

590771

101

Zoom out

Zoom in

1/160

GMC-I Messtechnik GmbH 101

Automatic Test – Administration

Test Step Specification – External Measurement

Measurement results from an external test instrument can be en-

tered for this test step. Whether or not the DUT has passed the

test or not is determined with additional entries for Min-Max limit

values and setpoint.

External measurements and visual inspections can be configured

such that voltage to the test socket is switched on during execu-

tion.

Short-form Operating Instructions

Setting Up an External Measurement

Ð Enter a new test step:

Ð Select external measurement

General Index Card

Ð Designation: Enter for purpose of identification/archiving

appears as a a headline in other windows for

improved clarity and cross-reference.

Ð Class: External measurement

Ð Description: Enter comment if required

Evaluation Index Card

The limit values must be entered here which result in failure of the

test in the event that they are exceeded (MaxLimitValue) or fallen

short of (MinLimitValue). A setpoint can be entered here as well.

See also section 6.3.6, “Evaluation of Measured Values for Indi-

vidual Test Steps”.

Ð Unit: Enter unit of measure

Unit Unit of measure for limit value setpoint or tol.

Ð Test condition: In progress

Ð Min Limit Value See entry examples in table on page 98

Ð Max Limit Value See entry examples in table on page 98

Ð Setpoint: Target value

Ð Tolerance: In progress

Note



Select a limit value which either complies with or is stricter

than the legally binding regulations.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECUSTAR FM in the language / languages: English as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt SECUSTAR FM Manual

Product: