590614
19
Zoom out
Zoom in
Previous page
1/71
Next page
GMC-I Messtechnik GmbH 19
Control Functions
4.1.3 Quick Measurements
Measurements performed using a suitable fixed measuring range
are executed more quickly than those which utilize automatic
range selection. Quick measurement is made possible with the
following two functions:
Manual measuring range selection, i.e. selection of the measuring
range with the best resolution (see chapter 4.1.2).
or
•With the DATA function (see chapter 4.4). In this way, the
appropriate measuring range is selected automatically after the
first measurement and the second measurement is executed
more quickly.
The selected measuring range remains active for the subsequent
series of measurements with these two functions.
4.2 Zero Offset / Relative Measurements
Depending upon deviation from the zero point, zero balancing or
a reference value for relative measurements can be stored to
memory:
The applicable reference or correction value is deducted
individually for the respective measuring function as an offset from
all subsequent measurements, and remains in memory until
deleted, or until the multimeter is switched off.
Zero balancing and reference value adjustment can be used for
auto-ranging, as well as for manual measuring range selection.
Zero Balancing
Ð Plug the measurement cables into the instrument and connect
the free ends to each other, except for capacitance
measurement in which case the ends of the cables are not
connected to each other.
Ð Briefly press the ZERO | ESC key.
The instrument acknowledges zero balancing with an acoustic
signal, and the “ZERO ΔREL” symbol appears at the LCD. The
value measured at the moment the key is pressed serves as a
reference value.
Ð Zero balancing can be cleared by once again pressing the
ZERO | ESC key.
Note
As a result of TRMS measurement, the multimeter dis-
plays a residual value of 1 to 30 digits with short-circuited
measurement cables as the zero point for V AC / I AC or
V(AC+DC) / I (AC+DC) measurements (non-linearity of the
TRMS converter). This has no influence on specified
accuracy above 2% of the measuring range (or 3% in the
mV range).
Setting the Reference Value
Ð Plug the measuring cables into the instrument and measure a
reference value (max. 5000 digits).
Deviation from zero
– With short-circuited measurement cables for V, Ω, A
– With open input for capacitance unit of measure F
Display
0 to 200 digits ZERO ΔREL
> 200 to 5000 digits ΔREL
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt SECULIFE HIT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt SECULIFE HIT in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt SECULIFE HIT

Gossen Metrawatt SECULIFE HIT User Manual - Dutch - 70 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info