776259
11
Zoom out
Zoom in
Previous page
1/62
Next page
GMC-I Messtechnik GmbH 11
Significance of Individual Parameters
Test Instrument On-Time
The period of time after which the test instrument is automatically
shut off can be selected here. This selection has a considerable
influence on the service life and the charging status of the batter-
ies.
LCD Illumination On-Time
The period of time after which LCD illumination is automatically
shut off can be selected here. This selection has a considerable
influence on the service life and the charging status of the batter-
ies.
Submenu: (Rechargeable) Battery Level Query
If (rechargeable) battery voltage has dropped to 8.0 V or less, the
LIMIT LED lights up red and an acoustic signal is generated as well.
Note
Measuring Sequence
If (rechargeable) battery voltage drops
to below 8.0 V during the course of a
measuring sequence, this is only indi-
cated by means of a pop-up window.
Measured values are invalid. The measurement results
cannot be saved to memory.
Press ESC in order to return to the main menu.
Attention!
!
Data, including sequences, are
lost when the language, the pro-
file or the DB MODE is changed,
or if the instrument is reset to de-
fault values!
Back up your structures and
measurement data to a PC
before pressing the respec-
tive key.
The prompt window shown at
the right asks you to confirm
deletion.
User Interface Language (CULTURE)
Select the desired country setup with the appropriate country
code.
Caution: All structures and data will be deleted (see note above)!
Profiles for Distributor Structures (PROFILES)
The profiles are laid out in
a tree structure. The tree
structure for the utilized
PC evaluation program
may differ from that of the
PROFITEST INTRO. For this
reason, the
PROFITEST INTRO provides
the user with the opportu-
nity of adapting this struc-
ture.
Selecting a suitable profile
determines which object
combinations are made
possible. For example,
this makes it possible to
create a distributor which is subordinate to another, or to save a
measurement to a given building.
Select the PC evaluation program you intend to use.
Caution: All structures and data will be deleted (see note above)!
If you have not selected a suitable PC evalua-
tion program and, for example, if measured
value storage to the selected location within the
structure is not possible, the pop-up window
shown at the right appears.
Default Settings (GOME SETTING)
The test instrument is returned to its original default settings when
this key is activated.
Caution: All structures and data will be deleted (see note above)!
Adjust Brightness and Contrast
DB MODE – Database Representation in Text or ID Mode
Creating Structures in the TXT MODE
The database in the test instrument is set to the text mode as a
default feature and “TXT” appears in the header. You can create
structure elements in the test instrument and label them in plain text,
e.g. Customer XY, Distributor XY and Circuit XY.
Creating Structures in the ID MODE
You can work in the ID MODE as an alternative, in which case “ID”
appears in the header. You can create the structure elements in the
test instrument and label them with any desired ID numbers.
Note
When transferring data from the test instrument to ETC at
a PC, ETC always uses the same representation as the
test instrument (TXT or ID mode).
When transferring data from ETC at the PC to the test
instrument, the test instrument always uses the same
representation as ETC.
In other words, the respective data recipient always uses
the same representation as the data transmitter.
Note
Structures can be created in the test instrument in either
the text mode or the ID mode.
In contrast, designations and ID numbers are always
assigned in ETC.
0a
0b
2
3c
3d
3e
3f
Jump back to
Increase brightness
Decrease brightness
Increase contrast
Decrease contrast
previous menu
3g
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt Profitest Intro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt Profitest Intro in the language / languages: English as an attachment in your email.

The manual is 1.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info