590777

Gossen Metrawatt PROFITEST MXTRA Manual

12
Zoom out
Zoom in
Previous page
1/96
Next page
12 GMC-I Messtechnik GmbH
Steps Required for Authentication
Make sure that the test instrument is within range of the PC
(roughly 5 to 8 meters). Activate Bluetooth
®
at the test instrument
(see figure 1) and at your PC.
The function selector switch must be in the SETUP position to this end.
Make sure that the test instrument (see figure 3) and your PC are
visible for other Bluetooth
®
devices:
In the case of the test instrument, the word “visible” must be dis-
played underneath the eye symbol.
Use your Bluetooth
®
PC driver software to add a new Bluetooth
®
device. In most cases, this is accomplished with the help of the
“Add new connection” or “Add Bluetooth
®
device” button.
The following steps may vary, depending on which Bluetooth
®
PC
driver software is used. Basically, a PIN code must be entered at
the PC. The default setting for the PIN code is “0000”, and is dis-
played in the main Bluetooth
®
menu (see figure 1) at the test instru-
ment. Subsequently, or previously, an authentication message
must be acknowledged at the test instrument (see figure 4).
If authentication has been successful, a corresponding message
appears at the test instrument. Furthermore, the authenticated
PC is displayed in the “Trusted Devices” menu at the test instru-
ment (see figure 2).
The MTECH+, MXTRA or the SECULIFE IP should now also be listed
as a device in your Bluetooth
®
PC driver software. Further informa-
tion is also provided here regarding the utilized COM port. With
the help of your Bluetooth
®
PC driver software, you’ll need to find
out which COM port is used for the Bluetooth
®
connection. This
port is frequently displayed after authentication, but if this is not
the case, this information provided by your Bluetooth
®
PC driver
software.
ETC includes a function for automatically ascertaining the utilized COM port
after successful authentication has been completed (see screenshot below).
If the test instrument is within range of your PC (5 to 8 meters),
wireless data exchange can now be initiated with the help of ETC
by clicking Bluetooth
®
in the “Extras” menu. The number of the cor-
rect COM port (e.g. COM40) must be entered to ETC when data
exchange is started (see screenshot below).
Alternatively, the COM port number can be selected automatically by clicking
the “Find Bluetooth Device” item in the menu.
Firmware Revision and Calibration Information (example)
➭ Press any key in order to return to the main menu.
Firmware Update with the MASTER Updater
The layout used for the entire range of the test instruments makes
it possible to adapt instrument software to the latest standards
and regulations. Beyond this, suggestions from customers result
in continuous improvement of the test instrument software, as
well as new functions.
In order to assure that you can take advantage of all of these ben-
efits without delay, the MASTER Updater allows you to quickly
and completely update your test instrument software on-site.
The user interface can be set to either English, German or Italian.
Note
As a registered user, you’re entitled to download the
MASTER Updater and the current firmware version free of
charge from the myGMC page.
Entering and Selecting a New Inspector
See also section 5.7 page 15 regarding the entry of a text.
4
5
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt PROFITEST MXTRA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MXTRA in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt PROFITEST MXTRA

Gossen Metrawatt PROFITEST MXTRA User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info