Manual Gossen Metrawatt PROFITEST MXTRA (page 10 of 96) (English)

590777

Zoom out

Zoom in

1/96

10 GMC-I Messtechnik GmbH

Significance of Individual Parameters

Test Instrument On-Time

The period of time after which the test instrument is automatically

shut off can be selected here. This selection has a considerable

influence on the service life and the charging status of the batter-

ies.

On-Time for LCD Illumination

The period of time after which LCD illumination is automatically

shut off can be selected here. This selection has a considerable

influence on the service life and the charging status of the batter-

ies.

Submenu: Rotary Switch Balancing

Proceed as follows in order to precision adjust the rotary switch:

1 Press the TESTS Rotary Switch / Battery Test softkey in order to

access the rotary switch balancing menu.

2 Then press the softkey with the rotary switch symbol.

3 Turn the rotary switch clockwise to the next respective measuring

function (IDN first after SETUP).

4 Press the softkey which is assigned to the rotary switch at the LCD.

After pressing this softkey, the display is switched to the next mea-

suring function. Labeling in the LCD image must correspond to the

actual position of the rotary switch.

The

level bar in the LCD image of the rotary switch should be

located in the middle of the black field, and is supplemented at

the right-hand side with a number within a range of -1 to 101.

This value should be between 45 and 55. In the case of -1 or 101,

the position of rotary knob does not coincide with the measuring

function selected at the LCD.

5 If the displayed value is not within this range, readjust the

position by pressing the readjust softkey. A brief acoustic

signal acknowledges readjustment.

Note

If labeling in the LCD image of the rotary switch does not

correspond with its actual position, a continuous acous-

tic signal is generated as a warning when the readjust

softkey is pressed.

6 Return to point 2 and continue. Repeat this procedure until all

rotary switch functions have been tested, and if necessary

readjusted.

➭ Press ESC in order to return to the main menu.

Submenu: Battery Level Query

If battery voltage has dropped to 8.0 V or less, the UL/RL LED lights

up red and an acoustic signal is generated as well.

Note

Measuring Sequence

If battery voltage drops to below 8.0 V

during the course of a measuring

sequence, this is indicated by means of

a pop-up window only. Measured val-

ues are invalid. The measurement results cannot be

saved to memory.

➭ Press ESC in order to return to the main menu.

Attention!

Data and sequences are lost

when the language, the profile or

DB mode is changed, or if the in-

strument is reset to default val-

ues!

Back up your structures,

measurement data and se-

quences to a PC before

pressing the respective key.

The prompt window shown at

the right asks you to confirm

deletion.

User Interface Language (CULTURE)

➭ Select the desired country setup with the appropriate country

code. Attention: all existing structures, data and sequences are de-

leted, see note above!

Profiles for Distributor Structures (PROFILES)

The profiles are laid out in

a tree structure. The tree

structure for the utilized

PC evaluation program

may differ from that of the

PROFITEST MASTER. For

this reason, the

PROFITEST MASTER pro-

vides the user with the

opportunity of adapting

this structure.

Selecting a suitable profile

determines which object

combinations are made

possible. For example,

this makes it possible to

create a distributor which is subordinate to another, or to save a

measurement to a given building.

➭ Select the PC evaluation program you intend to use.

Attention: all existing structures, data and sequences are deleted,

see note above!

If you have not selected a suitable PC evalua-

tion program and, for example, if measured

value storage to the selected location within the

structure is not possible, the pop-up window

shown at the right appears.

Default Settings (GOME SETTING)

The test instrument is returned to its original default settings when

this key is activated.

Attention: all existing structures, data and sequences are deleted, see

note above!

Adjusting Brightness and Contrast

Return to previous menu

Increase brightness

Decrease brightness

Increase contrast

Decrease contrast

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MXTRA in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt PROFITEST MXTRA

Gossen Metrawatt PROFITEST MXTRA User Manual - Dutch - 92 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt PROFITEST MXTRA Manual

Product: