Manual Gossen Metrawatt PROFITEST MXTRA (page 11 of 96) (English)

590777

Zoom out

Zoom in

1/96

GMC-I Messtechnik GmbH 11

DB MODE – Presenting the Database in Text Mode or ID Mode

The DB MODE functions are

available as of firmware ver-

sion 01.05.00 of the test

instrument and as of ETC

version 01.31.00.

Creating Structures in TXT MODE

By default, the database in the test instrument is set to text mode,

„TXT“ is indicated in the header. You can create structural ele-

ments in the test instrument und add designations in plain text,

e. g. Customer XY, Distributor XY and Electrical Circuit XY.

Creating Structures in ID MODE

Alternatively, you can work in the ID mode. „ID“ is indicated in the

header. You can create structural elements in the test instrument

which can be labelled with ID numbers at your discretion.

Note

When data are transferred from the test instrument to the

PC or ETC, ETC always retains the presentation (TXT or

ID mode) selected in the test instrument.

When data are transferred from the PC or ETC to the test

instrument, the test instrument always retains the presen-

tation selected in ETC.

So, the respective receiver of the data always adopts the

presentation of the sender.

Note

In the test instrument, structures can either be created in

text mode or in ID mode.

In the ETC software, however, designations and ID num-

bers are always allocated.

If no texts or ID numbers have been allocated when creating the

structures in the test instrument, ETC generates the missing

entries automatically. They can be subsequently edited in the ETC

software and transferred back to the test instrument if required.

Switching Bluetooth

On/Off (

MTECH+/MXTRA/

SECULIFE IP

only)

If your PC is equipped with a Bluetooth

interface, wireless com-

munication is possible between the MTECH+, MXTRA or SECULIFE IP

and ETC user software for the transfer of data and test structures.

One-time only authentication of the respective PC with the test

instrument is a prerequisite for wireless data exchange. The func-

tion selector switch must be in the SETUP position to this end.

The correct Bluetooth

COM port must also be selected in ETC

before each data transmission sequence.

Note

Activate the Bluetooth

interface at the test instrument dur-

ing data transmission only. Interface power consumption

reduces battery service life when activated continuously.

If several test instruments are within range during authentication,

the respective name should be changed in order to rule out the

possibility of a mix-up. Blanks may not be used. The default pin

code, namely “0000”, can be changed, but this is unnecessary as

a rule. As shown in figure 3, the MAC address of the test instru-

ment is displayed in the footer as hardware information.

Render your test instrument visible prior to authentication, and

subsequently invisible for security reasons.

When Bluetooth

active (= ON), the

Bluetooth

icon

appears in the

header instead of BAT, and

an interface icon appears

instead of MEM.

A closed interface icon indicates

an active Bluetooth connection

with data transmission.

Figure 1

Figure 2

Figure 3 Figure 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt PROFITEST MXTRA in the language / languages: English as an attachment in your email.

The manual is 2,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt PROFITEST MXTRA

Gossen Metrawatt PROFITEST MXTRA User Manual - Dutch - 92 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gossen Metrawatt PROFITEST MXTRA Manual

Product: