590654

Gossen Metrawatt METRISO PRIME Manual

10
Zoom out
Zoom in
Previous page
1/14
Next page
10 GMC-I Messtechnik GmbH
7 Maintenance
Attention!
!
Before replacing batteries completely disconnect the device from
all external power circuits.
For purposes of transport and maintenance we recommend that
the range selector switch be set to the OFF/V position, in order to
prevent unintentional activation of the tester.
7.1 Batteries
The condition of the batteries should be checked from time to time. Dis-
charged or corroded batteries must be removed from the battery com-
partment. If leakage occurs at the batteries, battery electrolyte must be
completed removed and the batteries replaced. The batteries must be
replaced when:
• the needle gauge no longer climbs into the scale which contains the
battery symbol when the range selector switch is set to the battery
test position.
• the indicator LED for the selected test voltage does not light up green.
Batteries are to be replaced as described in Chapter 3.1, page 5. Always
replace batteries as a complete set!
Note
Prior to lengthy periods of rest (e. g. holiday), we recommend
removing the (rechargeable) batteries. This helps to prevent
excessive depletion or leakage of batteries, which, under unfa-
vourable circumstances, may cause damage to the instrument.
7.2 Housing
No special maintenance is required for the housing. Keep outer surfaces
clean and dry. Use a slightly dampened cloth for cleaning. Avoid the use
of cleansers, abrasives or solvents.
Device Return and Environmentally Compatible Disposal
The instrument is a category 9 product (monitoring and control instrument)
in accordance with ElektroG (German Electrical and Electronic Device
Law). This device is subject to the RoHS directive. Furthermore, we make
reference to the fact that the current status in this regard can be accessed
on the Internet at www.gossenmetrawatt.com by entering the search term
WEEE.
We identify our electrical and electronic devices in accordance
with WEEE 2012/19/EU and ElektroG with the symbol shown to
the right per DIN EN 50419.
These devices may not be disposed of with the trash. Please contact our
service department regarding the return of old devices.
If you use batteries or rechargeable batteries in your instrument or accesso-
ries which no longer function properly, they must be duly disposed of in
compliance with the applicable national regulations.
Batteries or rechargeable batteries may contain harmful substances or
heavy metal such as lead (PB), cadmium (CD) or mercury (Hg).
They symbol shown to the right indicates that batteries or
rechargeable batteries may not be disposed of with the trash, but
must be delivered to collection points specially provided for this
purpose.
7.3 Measurement Cables
Damaged or buckled measurement cables may not be used under any
circumstances, because this may cause a reduction in insulation perfor-
mance. The permanently connected test cables are double insulated.
Inspect the measurement cables on a regular basis. We recommend that
a thorough inspection be carried out every 6 to 12 months.
Attention!
!
Even if only very slight damage is apparent at the measuring ca-
bles, we recommend that you send the tester, together with the
cables, to the GMC-I Messtechnik GmbH Repair and Replace-
ment Parts Service Department.
Pb Cd Hg
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gossen Metrawatt METRISO PRIME at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gossen Metrawatt METRISO PRIME in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gossen Metrawatt METRISO PRIME

Gossen Metrawatt METRISO PRIME User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info